Packaging Details
- Unit Type: piece
- Package Weight: 0.1kg (0.22lb.)
- Package Size: 10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)
INTRODUCTION
Small, light, waterproof and in a food safe wrapper, the single used data
logger is ideal for monitoring the temperature of shipments in transit.
Recordings are started by pressing the start button. The data logger is
then placed inside the carton and dispatched. At the receiving end, the
data logger is taken from the package and removed from the protective
wrapper. It is placed into the USB slot on a computer to get PDF report
directly without any software and driver.
1. START
Press and hold the button for about 5sec. until the GREEN LED lights
to start logging. If the GREEN LED doesn\`t light, please don\`t use this
data logger and user must make sure it\`s correct to start.
When logging, the GREEN LED will flash once every 5sec. If readings
exceed alarm limit, the RED LED will flash once at the same time to the
GREEN LED.
2. PLACE
Put the data logger in the place or specific environment where you want
to monitor and record.
3. STOP
Press and hold the button for about 5sec. until the GREEN LED lights to
stop logging.
When logging stop, only RED LED will flash once every 5sec.
4. GET PDF REPORT
Tear the plastic bag and you can now plug the data logger into an
available USB port on a PC. The RED LED will light when a PDF is
generating. And then the RED and GREEN LED will light when
finished. It may need several seconds (According to logged readings)
to finish. And user should wait until the PC find a U-disk called
“PDF”, then user can get the PDF report in the U-disk.
-->