Packaging Details - Unit Type: lot (2 pieces/lot)
- Package Weight: 0.04kg (0.09lb.)
- Package Size: 15cm x 10cm x 10cm (5.91in x 3.94in x 3.94in)
Packaging Details - Unit Type: lot (2 pieces/lot)
- Package Weight: 0.04kg (0.09lb.)
- Package Size: 15cm x 10cm x 10cm (5.91in x 3.94in x 3.94in)
t; Introduction: This is a communication using i2c, built-in PWM driver and a clock. This means that this will be very different from the TLC5940 series. You do not need to constantly send signals occupy your microcontroller! It\`s 5V compatible, which means you can also control and safely drive a 6V output with a 3.3V microcontroller (it\`s also okay to control the white or blue LEDs with a positive 3.4+ voltage) 6 address select pins allow you to hook up 62 driver boards on a single i2c bus for a total of 992 PWM outputs. That will be a very large resource. About 1.6Khz FM PWM output Ready for stepper motor output 12-bit resolution, which means that the 60Hz update rate can reach 4us resolution Push-pull output can be configured or open output The output enable pin quickly disables all outputs Features: PCA9685 chip is wrapped in a small central plate l power input terminal l green power indicator l Four 4-pin 3-pin connectors allow you to insert 16 servo motors at a time (the servomotor plug is slightly wider than 0.1 ", so you can fit four pairs of 0.1" connectors) Reverse polarity protection input on the patch panel l cascade design l Put a large capacitor on the V + line (you will need it in some cases) The maximum input voltage on the periphery depends on the capacitance of this 10V1000uf l All PWM output lines put a 220 ohm series resistor to protect them, and can easily drive the LED. -->
|