1.When you use a motor, do not have a bound, such as the next dose not through the rotating shaft into the bearing, the operation of the motor.
2.The rotation of the shaft may have opposite effects on the service life of the motor. In order to prolong the service life, please check whether the load is in accordance with the provisions, not overload, or the shaft end of the goods to be suspended.
3.Manufacturing heavy radiation eccentricity load, harmful motor life.
4.Do not store in the surrounding high temperature or extreme humidity, also do not place in the corrosion of gas, will reduce the motor effect.
5.Do not run in high temperature and humidity.
6.When the power is negative the motor terminals solder, soldering iron temperature340C±40Temperature, heating time3Within seconds, the plastic can not be deformed, in the work, so that the solder point into the motor or break the end of the wire, so that the motor function decline.
7.Don\'t let the motor shaft is stuck, when incoming power, in a short period of time will make the motor overheating and burned its accessories.
8.Due to the lack of technical staff, so that the motor in case of reference to the matter, or the surface of the judge is clearly a fault, it is not guaranteed quality.
9.Supply electricity, and be sure to be in the range of measurable requirements.
10.Pulley or gear installation, in the press, do not increase the abnormal.
11.When installing the motor, the screw is too long, will cause the motor itself and the rotor contact, will affect the characteristics.