aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics
- is_customized:
- Yes
- Structure:
- Diaphragm Pump
- Brand Name:
- XTL
- Pressure:
- High Pressure
- Standard or Nonstandard:
- Standard
- Theory:
- Rotary Pump
- Model Number:
- 0142HA-12-45
- Power:
- 45W
- Application:
- for lawn,garden,vehicle cleaning, carpet cleaning
- Fuel:
- Electricity
- Usage:
- for lawn,garden,vehicle cleaning, carpet cleaning
- Lift head:
- 75m
- Suction head:
- 2m
- Range:
- 7.5m
- Maximum flow:
- 4L/min.
- Voltage:
- DC12V
- Power:
- 45W
- Intake Pressure:
- 0.1Mpa
- Outlet Pressure:
- 0.75Mpa
- Material:
- Plastic
- Motor Lifespan:
- 3-5years
Packaging Details
- Unit Type:
- piece
- Package Weight:
- 0.800kg (1.76lb.)
- Package Size:
- 17cm x 10cm x 6cm (6.69in x 3.94in x 2.36in)
p>
AliExpress Supply DC12V 45W micro diaphragm pump welcome to scan our products !
welcome to China !
welcom to visit our factory !
Miniature Diaphragm Model Description
0142YA-12-60 as an example
1.0142 and 3210 are classified motor
2.Y is with pressure switch (intelligent), H is no pressure switch (backflow valve type).
3.A is two straight pipe, B is the front straight, the back-end thread with fixing nut, C is a straight tube inlet, outlet with a fixed nut threaded connection, D is two threaded connection, unworthy of nuts can be directly then 4 tap. No ABCD letters is another completely different shape a pump.
4.12, 24 representatives of 12/24V DC motor.
5.60 represents the power is 60W, others such as 70W, 80W also represents the power.
6.Back of N, use is representative of the oil pumping, S is the pumping of food. If not, is the ordinary pump.
Pressure switch pumps and Pump recirculation valve characteristics
Pressure switch type
Features: When the water turned off, it will automatically cut off the power supply, the motor stops. After the water turned on, will automatically power on, the motor starts running. Blowhole size on strict requirements, or motor pump is not working properly even damage the motor or pump.
Scope: washing machine, solar Sheung Shui, remote automatic control input without water, without water lost through automatic control other auxiliary equipment, and require frequent switching energy and other occasions.
Return valve type
Features: When the water part of the block (such as orifice too small) or all of the time block, the motor will not stall, single-return valve opens, water will circulate in the pump. Not too high demands on the blowhole, strong adaptability of the blowhole.
Scope: high pressure spray equipment, agricultural sprayers.
Product Description
This is a high quality DC micro diaphragm pump, widely used in general industry equipment, medical equipment, chemical equipment, farming (lawn and garden), tour vehicles, special vehicle, ship, beverage, vehicle cleaning, carpet cleaning, ground cleaning, water purification and water treatment equipment. Chemical pump, metering pump, air conditioning pump, flow pump, hydraulic test pump, sewage pump, booster pump.
Model: 0142HA-12-45
Voltage: 12V
Power: 45W
Intake Pressure: 0.1Mpa
Rated Pressure: 0.75Mpa
Flow (MAX): 4L/min
Suction Head: 2m
Lift Head: 70m
Range: 7.5m
Motor Lifespan: 3-5years
Net Weight: About 0.6Kg
Material: Plastic
Color: Black
Size: Approx. 165 x 95 x 60mm (L*W*H)
About Shopping and payment
1. We do suggest that customers make sure that item/items can be fit your needs or we can help you to check whether item/items can be suitable before making a deal.
2.We suggest you\'d better contact us before payment, we can accept ESCROW,Credit cards,T/T,Western Union and so on. Of course,payment on itslef is advised. Also, it is the safest payment for you.
3.If you have any other problem about payment, pls contact us asap.
Selection Caption
Pump interface dimensions and plumbing connection method
The direction of the water and power lead
Dimensions
Miniature Diaphragm Handling Precautions
- Do not use the temperature exceeds 60 degrees celsius high temperature water or dirty water.
- Motors can splash a little water (dry after use), not directly in front of the motor pump spray, non-motor pump in the water.
- Motor pump not long in damp places.
- Do not disassemble the machine or adjust the pressure setting screw.
- Before use, make sure the power parameters and motor pump input parameters match.
- Recommended outlet inside diameter of not less than 5.5mm, the length should not exceed 10m (can not be too long or too thin, or off the gun flow and pressure effects).
- Proposed inlet pipe inner diameter of not less than 6mm, draw water from the time should not exceed 1.5mm.
- When connected to water and other pressure water supply, can properly plus hose\'s length, but water pressure not bigger than 0.2Mpa.
- Please be repaired or replaced by professionals when 9 power cord is damaged.
- When using battery power, the need to guard against battery power loss.
- long-term need or disconnect the power supply when the pump motor suspended.
Many of Models for you to Choose as Follows
Common abnormalities problem analysis and solution
Phenomenon | Cause | Solution | Precautionary approach |
Machine no response | The fuse has blown | Replace proper fuse | Make sure the line does not exist in a short circuit, the choice of parameters appropriate fuse |
Line is not connected | Check the line | Do not pull, bend, twist the power cable |
Power, motor, main switch or pressure switch is damaged | Replace the corresponding parts | Use appropriate parts, nozzle, do not overload operation |
Outlet pressure decreases | Inlet pipe leak or rupture caused by the inlet of the pump seal bad connection | Replace or improve the inlet to the pump inlet connection | Avoid artificial folded, twisted inlet hose, ensure inlet hose good seal |
Inlet deflated | Replace hose | Avoid artificial folded, twisted inlet hose |
Power cable,intake and ourlet hose too thin or too long | Adjustments related components | Adjustments related components, Meet the requirements |
Low-voltage or power shortage | Replace proper power supply | Use a good quality, meet the requirements power |
Water filter clogging | Cleaning water filters | Cleaneing water filter regularly |
Screws between the motor and the motor connection block loose | Tighten the screws | Add a little glue to prevent loose again |
Interface leaking | Hoop or screw is not tight enough | Adjust the tightness | Adjust the tightness |
Non-absorbent | Long time no using, pump too dry | Start the pump while suction outlet or pour water from inlet | Except winter, but do not drain the water pump too dry |
Low-voltage or power shortage | Replace proper power supply | Use a good quality, meet the requirements power |
Power cable too thin or too long | Replace proper power cable | Choose the appropriate power cable |
Inlet pipe leak or rupture caused by the inlet of the pump seal bad connection | Replace or improve the inlet to the pump inlet connection | Avoid artificial folded, twisted inlet hose, ensure inlet hose good seal |
Inlet deflated | Replace hose | Avoid artificial folded, twisted inlet hose |
Used dirty water, pump valve seal damage | Replace the valve | Use clean water,installation high-density filters |
Motor repeated starts (pressure switch type) | Used dirty water, pump valve seal damage | Replace the valve | Use clean water,installation high-density filters |
Outlet leaking | Solve outlet leakage | Timely solve outlet leakage |
Machine gun off-stop | Pressure switch contacts fused | Replace pressure switch | Use a good quality pressure switch |
Pressure seting too high | Adjust the pressure setting | Timely adjusting |
Outlet expansion coefficient much | Replace good quality outlet hose | Timely replacement |
Pump leaks | Pump parts damage | Replace damaged parts | Timely replacement |
Head screw loose | Re-tighten the screws | Timely and tighten the screws |
Pressure seting too high | Adjust the pressure setting | Timely adjusting |
Water pressure instability, severe motor pump jitter | Blowhole is too small (pressure switch type) | Adjust the nozzle diameter | Timely adjusting |
Gun nozzle is blocked garbage | Remove trash | Use clean water,installation high-density filters |
Pressure seting too low(Pressure setting by vibration and other factors) | Adjust the pressure setting(Not too much, otherwise easily damage the pump) | Reduce vibration and other factors |
Shipping Terms:
We Will Send Your Order Within 7 Days After We Received Your Payment. Please Choose The Shipping You Are Want.For The Shipping, We\'d Like Introduce Details For You in Here:
(1). E-package is Only For US Customer, It Takes about 15Days To Arrive .
(2). China Post Air Mail is Send To Most of Countries, It Takes about 22Days To Arrive.
(3). If You Choose EMS/DHL/UPS Shipping, It Takes 5-8Days To Arrive.
(4). Before buying,please make sure your and alibaba address is correct.Or not,please correct it before payment.
Customer Clearance:
We Will Write A Lower Value On Package to Avoid Produce Tariffs. Every Country Has Different Tariffs Policy, Sorry We Are Not Responsible For Customer Clearance. Kindly Notice This!
If You Want us Write Product Details on Package as You Want, Please Send Message to us In the First Time When You Make Order.
After-Sales Service:
We Are A Professional Business Company. We Will Offer Good After-sales Service For You. If You Have Any Question About Our Product Or Service, Kindly Send Message To US. We Will Reply You AS Soon As Possible.
Feedback :
If You Are Satisfied With Our Product, Kindly Leave Full-stars and Good Feedback For us. Your Feedback will Encourage us DO it Better In The Further. Thanks!
Warranty and Return
1. 12months Warranty for defective items (excluding items damaged and/or misused after receipt). Buy with confidence
2. Refund or replacement request is available only the requests within 1 week after parcel received returning the item as the same condition as received.
3. Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.
4. Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
5. Return shipping is to be paid by the Buyer
Our Contact Styles