NEW Drill Locator Hole Drill Guide Dowel Jig Woodworking Drilling Template Guide Tool Drill Locator Jig Woodworking Locator Tool
Bullet Points:
1¡¢For Easily Drilling: Woodworking drilling locator is designed to make wood drilling easier, straighter and more accurate. Using a 1/4 inch hexagonal shaft, it can be used with cordless and corded electric drills and impact drivers.
2¡¢Used in Multiple Directions: The fence can be connected to any of the 4 sides of the square base. In addition, the fence can be used in multiple directions. Also It can be used as the edge of the board.
3¡¢With Full Accessories: Keyed chuck, tapered depth control shaft and limit ring, spring return, reversible chuck bracket, built-in V-groove, alignment and adjustable fence.
4¡¢Our woodworking bit positioner has a bit capacity of 1 inch, but if you remove it and turn it upside down, you can install a bit up to 2 inches wide. The V-shaped groove on the base can easily drill the center of logs such as round dowels.
5¡¢Built-in Hex Bit: There are two pins in the center that can be stored on the boat when not in use. When in use, they are screwed into the bottom of the base and can be tightened withof the column caps, which has a built-in hex bit.
Specification:
Material: Alloy steel
Color: red
Weight: about 700 grams
Packing List:
Drilling Locator*1 (Excluding Electric Drill And Drill Bit)
Note:
How To Drill a Pocket Hole:
1. Adjust the drilling height according to the thickness of the wooden.
2. Tighten the clamp to fix the drill guide on the wooden.
3. Put the step drill bit into the guide hole.
4. Turn on the electric drill and set it to a certain speed of 500-1500rpm.
5. Before drilling half of the step drill bit into the wooden, please drill slowly to improve accuracy.
Others:
Before powering on the drill, do not touch the wood with the drill bit.
Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
Due to manual measurement, there is a tolerance in the product size.