Packaging Details
- Unit Type:piece
- Package Weight:1.0kg (2.20lb.)
- Package Size:22cm x 11cm x 22cm (8.66in x 4.33in x 8.66in)
rc="http://ae01.alicdn.com/kf/HTB1GljpMhnaK1RjSZFtq6zC2VXas.jpg?width=1&height=1&hash=2">
Standard test refers to satisfactionIEC 61032 & GB 16842Standard requirements, inIPProtective tests are used to simulate arms and are mainly used forIPBit Characteristic Number of Protection Level Test2And additional lettersBTest of the project; in test requirements to prevent proximity to dangerous parts,BType test stick required10±3 NThrust; For other requirements, please refer to relevant standards.
Our Features:
1, this test refers to the GB,IEC,UL related standard requirements can be met at the same time.
2, finger damage, easy to replace, reduce the cost of use.
The 5 N or 50 N thrust system can be added as required.
4. Dimensions required by German DIN or Japanese Electrical Safety Standard can be manufactured as required.
method of application
l As shown in the figure, the joint part of the standard test does not touch the charged part or cannot approach the dangerous part, and50mm-20mmThe baffles can not be entered.
l In the test requirements to prevent access to hazardous components,BType test stick required10±3 NThrust. Products without thrust should be used in conjunction with the push-pull meter.
l In the anti-electric shock test, the need to wiring and configure the power supply, indicating the device: Determine whether the grounding line (three plug), open the product of the test the power switch, apply the corresponding thrust.
-----
------
------
-->