|
aHR0cDovL2ZyZWVzaGlwLmNvLmtyItem specifics - Model Number:RC-11B
- Brand Name:minihua
- No.:2222222
- Decoration and construction content:Installation engineering
Packaging Details - Unit Type:piece
- Package Weight:0.001kg (0.00lb.)
- Package Size:1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
Packaging Details - Unit Type:piece
- Package Weight:0.001kg (0.00lb.)
- Package Size:1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
le="color: #404040;"> Product principle: RC rotary paddle level switch is the use of micro motor as driving device, the drive shaft is connected with the clutch, when not in contact with material, the motor runs normally, when the blade contacts with material, the motor stops rotating, the output of a contact signal detection device, and cut off the power to stop rotating. When the material drops, the resistance of the blade disappears, and the detection device returns to the original state by the torsion spring. Torque can be adjusted according to different specific gravity materials. Product features: - The imported motor is reliable and can run continuously for a long time;
- Unique oil seal design can prevent dust penetration along the shaft;
- The torque is stable and reliable, and the torque can be adjusted;
- When the blade is under heavy load, the motor slewing mechanism will automatically slip and protect it from damage;
- The specifications, blades and lengths can be customized.
Electrical parameters: - Power Supply
- (A) 110VAC (B) 220VAC (C) 12VAC (D) 24VDC
- Contact capacity: 5A/250VAC SPDT
- Power: 5W
- Withstand voltage: 1500VAC * 1min
- Blade speed: 1rpm
- Protection level: IP65
- Incoming line specification: 1/2 "PF"
- Applicable gravity: 0.3g/ cm3
- Temperature: -20 ~ 80 (high temperature resistant to 350 degrees)
-
-
Model: RC-10B Thread type - Continuation: 1 "PF
- Suitable for horizontal installation
- Connection and mouth to the leaf length can be customized
-
-
Model: RC-11B Flange type - Continuation: 2-1/2 * 5 Kg/cm2
- Suitable for horizontal installation
- Connection and flange to blade length can be customized
- Customizable high temperature type
-
-
Model: RC-20 "Shaft protected tube type" - Continuation: 2-1/2 * 5 Kg/cm2
- Suitable for horizontal installation or vertical installation
- Connection and flange to blade length can be customized
-
-
Model: RC-30 "Axle length adjustable" - Continuation: 2-1/2 * 5 Kg/cm2
- Suitable for vertical installation
- The impact is up to 800Kg
- Connection and flange to blade length can be customized
- This type can also be made into adjustable blades
-
-
Model: RC-40 "High temperature shaft protection tube type" - Continuation: 2-1/2 * 5 Kg/cm2
- Suitable for horizontal or vertical installation
- High temperature: 350 C
-
-
Model: RC-50 "High temperature cable type" - Continuation: 2-1/2 * 5Kg/cm2
- Suitable for vertical installation
- Connection and flange to blade length can be customized
Torque adjustment According to the detected material density is different, need to adjust the torque tension of the spring, the proportion of large torsion spring tension to the weak Xeon, and vice versa. Please do not arbitrarily change the torsion spring, so as to avoid misoperation Installation notes - 1. Before installation, make sure whether the power supply voltage is consistent with the voltage above the identification.
- 2, the anti rotation material level switch should be avoided in the feed port, when it can not be avoided, the protective baffle can be installed to protect the blade from the material impact. As shown in the picture.
- 3, horizontal installation, the junction box entrance should be vertical down, the cable nut must be locked, if conditions can be added rainproof cover, etc..
- 4. Confirm horizontal installation or vertical installation before installation.
- 5, horizontal installation, the blade and horizontal downward 10~20 degrees angle to install, in order to reduce the impact of materials.
|
-->
|
|
|
|
|