|
Packaging Details - Unit Type:piece
- Package Weight:0.065kg (0.14lb.)
- Package Size:40cm x 30cm x 20cm (15.75in x 11.81in x 7.87in)
Packaging Details - Unit Type:piece
- Package Weight:0.065kg (0.14lb.)
- Package Size:40cm x 30cm x 20cm (15.75in x 11.81in x 7.87in)
tyle="max-width:650px;overflow:hidden;font-size:0;clear:both"> /piece /piece /piece /piece /piece /piece /piece /piece HI LO Welding Gage Internal Single Purpose Gauge Welding Ruler Root Gap Metric - Description:
- 100% brand new and high quality
-
- Internal Hi-Lo gauge:
- 4 quick steps check internal alignment
- You can check the internal alignment of you fit-up quickly with the Hi-Lo gauge
- 1. Unlock the retaining screw. press the gauge legs beyond the barrel
- 2. Insert the legs (wired) into the root gap space or the two pieces of pipe to be fitted, turn the gauge 90°, being careful to apply a constant back pressure to the barrel
- 3. Hold the gauge as square as possible with the fitting to obtain an accurate reading. lock the retaining screw. reverse the 90° turn and remove the gauge, you\`re now ready to read the increment opposite the red line
- 4. When the red line aligns with the 1/32 increment line you have a good internal alignment and fit-up. misalignment can be determined from the zero line by increment marking of 1/16 inch
-
- Rootweld spacing gauge:
- Easy operation determines rootweld spacing
- 1. Unlock the retaining screw and insert the gauge interior alignment stops between the two pieces of pipe to be fitted
- 2. Insert the leg with the longer taper into the root gap until it makes contact with both slides of the gap.
- 3. Re-lock the retaining screw, remove the gauge and read it
- 4. The scale is calibrated in fractional dimensions from 1/32 to 3/16 in 1/16 inch increments, the read-out you receive represents the amount of rootweld gap
-
- Package included:
- 1 X Wedling Single Purpose Gauge
- 1 X Portable leather bag
- 1 X User manual
-
-->
|
|
|
|
|