|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¸ðµ¨ ¹øÈ£: HDS1022M-I
- ½Ç½Ã°£ »ùÇøµ ¼Óµµ: 100MSa/s
- ¹êµå ³Êºñ: 20mhz
- µðÁöÅРä³Î: 2
- DIY ¿ëÇ°: Àü±â
- ºê·£µå À̸§: MTKY
- ±Ù¿ø: CN (Á¤Ç°)
- Áõ¸í¼: ¼¼·ý
OWON 20Mhz 2CH Digital Handheld DSO Oscilloscope With Channel Isolation with Multimeter Function
Specification ? Read the value clearly in the sun through half reflection LCD+?2?in?1?(DSO?+?Multimeter)? +?with?good?ISOLATION?between?channels +?The channel-to-channel isolation has a safety rating of 1000 V, CAT II +?Auto-scale?function +?FFT?function +?20?group?automatic?measurement?options +?Bandwidth:?20MHz +?USB?data?transmission?supported? +?Rechargeable?Li-ion?battery? +?Multimeter?newly?supported?SCPI ? Model | ?HDS1022M-I | Bandwidth | 20MHz | Sample Rate | 100MS/s | Record Length | 6K points | Channel | dual, insulated ground of 1000 : 1 | Display | 3.7'' color TFT LCD, 640 x 480 pixels | Horizontal Scale (s/div) | 5ns/div - 100s/div, step by 1 - 2 - 5 | Vertical Sensitivity | 5mV/div - 5V/div (at input ) | Vertical Resolution | 8 bits | Trigger Mode | Auto, Normal, and Single | Waveform Math | ?£«, £, *, / , FFT, invert | Communication Interface | USB host, and USB device | Battery | built-in Li-ion battery, 7.4V / 3500mAh | Dimension (W / H / D) | 113?x 180?x 40 mm | Weight | 645.00?g |
Multimeter Specifications | Full Scale Reading | ?3(3/4) digits?(max?4000?count) | ?Diode | ?0V?- 1V | Input Impedance | ?10 M¥Ø | ?On?/?Off Test | ?<?50?(¡¾?30) beeping | Voltage | VDC : 400mV, 4V, 400V, 1000V?: ¡¾(1% ¡¾ 1 digit); max input : DC 1000V VAC : 4V, 40V, 400V : ¡¾(1% ¡¾ 3 digits), Frequency : 40Hz - 400Hz; max input : AC 750V (virtual value) | Current | DCA: 40mA, 400mA: ¡¾(1.5% ¡¾1 digit), 10A: ¡¾(3% ¡¾ 3 digits) ACA: 40mA: ¡¾(1.5% ¡¾ 3 digit); 400mA: ¡¾(2 ¡¾ 1 digit); 10A: ¡¾(3% ¡¾ 3 digits) | Impedance | 400¥Ø: ¡¾(1% ¡¾ 3 digits); 4K¥Ø / 40K¥Ø / 400 K¥Ø / 4M¥Ø: ¡¾(1% ¡¾ 1 digit); 40M¥Ø: ¡¾(1.50% ¡¾ 3 digits) | Capacitance | ?51.2nF - 100uF : ¡¾(3% ¡¾ 3 digits) |
Product Display
1.?2-in-1 station Oscilloscope + 3 3/4 digits multimeter + FFT spectrum analyzer. 2.?Auto-scale Function While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale and timebase scale according to the type, amplitude and frequency of input signal. 3.?Trigger Sensitivity Adjustable While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale and timebase scale according to the type, amplitude and frequency of input signal. 4.?Alternative trigger function OWON HDS digital oscilloscope alternative trigger function support 2?simultaneous?signal test, improve working efficiency.
|
|
|
|
|