|
aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics Packaging Details - Unit Type:
- piece
- Package Weight:
- 0.210kg (0.46lb.)
- Package Size:
- 8cm x 8cm x 8cm (3.15in x 3.15in x 3.15in)
Features: This is a high capacity driver module for brushless DC motor, another cost-effective choice for your motion control needs. Module Specs: Working Voltage: 12 - 36V DC Drive Current: max 20 amp Drive Capacity: max 500 Watts (this relates to working voltage) Speed control: Yes Direction Control: Yes Over-current protection: Yes (20 amp) Short circuit protection: Yes Module Size: 63 * 43 * 17mm Left (Up): 5V: Output 5V Z/F: DIR (cw / ccw) VR: Speed control GND: GND Right: VCC: Input (12~36V) GND: power - MA, MB, MC: Motor Wire A, B, C About Heat Sink: The package includes the module only. Heat sink is NOT included. (heat sink has relatively heavy weight and costs more than its own value in international shipping). If buyer still needs heats sink and are aware of the higher cost, please contact us in advance prior to order. Before using the module, user must match a proper heat sink for the module. Otherwise the module will be damaged for over heat. Without heat sink, the allowed power range for the module will be much lower limited. Recommended Size of heat sink: over 200 cm2 (square cm). The module\'s output consists of 6 pieces of 80Amp CMOS, with high power capacity. When adding heat sink, please pay attention to insulation for the 6 CMOSes. About Connections: 5V: the module outputs 5V for external potentiometer to adjust speed (when not using potentiometer, please DO NOT connect it to other external circuit, otherwise will damage the module) Z/F (CW / CCW): control motor direction (CW when not connected, CCW when connected to 5V) VR - Speed control: input 0.5 to 5V DC, motor speed adjustable from 6% to 100% (for a normal potentiometer, center pin of pot connect to this point, and two side wires of pot to 5V and GND) GND: ground for speed control voltage VCC: power in positive: voltage 12V to 36V DC GND: power in negative A/B/C motor wires: can be connected randomly to three groups of coils of motor. If the phase is wrong, then the motor running wrong direction. We can then change randomly two wires connection to change motor direction. Package Contents 100% Brand New 1x High Capacity 12-36V Brushless DC Motor Driver Speed Controller Module SHIPPING: Item will be shipped within 2 -3 days after full payment is received. The Item will be shipped by air mail Normally the shippment to worldwide is used to take 20 to 39 business days, exclude Sat & Sun. PAYMENT: We accept only. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. WARRANTY; If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it. If is item is defective in 3 months, you can return it to us. We will send you a new replacement after receiving the defective item. CONTACT US: If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us. We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven\'t received item.
|
|
|
|
|