aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics
- Gross Power:
- 1400W
- Brand Name:
- Upart
- Color & Page:
- Multicolor
- Condition:
- New
- Usage:
- Label Printer
- Dimensions(L*W*H):
- 103x 70x 77cm
- Automatic Grade:
- Semi-Automatic
- Model Number:
- HP3805
- Type:
- Heat Transfer
- Plate Type:
- swinger heat press machine double protector cover
- Item name :
- swinger heat press machine double protector cover
- Voltage:
- 110V/220V
- Power:
- 1.4kw
- Time scope:
- 0-999 sec
- Max temperature:
- 245 c degree
- Worktable:
- drawer style
Packaging Details
- Unit Type:
- piece
- Package Weight:
- 100.000kg (220.46lb.)
- Package Size:
- 103cm x 70cm x 77cm (40.55in x 27.56in x 30.31in)
pneumatic swinger heat press machine double protector cover
Buyer Noted:
For all countries which machine cost is the same. Only different country have different carrier cost. Is better to confirm that with us before do the payment.
And our amount have not include the tax. If have not your any requested we will
declare the actually value as your paid in invoice. Please contact us if you need us
to declare low value.
Delivery Way:
By DHL, Fedex, TNT, UPS, EMS etc. We will use of them as your country name base on safe. If you have any probem for them, please notify us.
pneumatic swinger heat press machine Specification:
Machine Type | pneumatic swinger heat press machine |
Controller | Digital Time & Temp. Controller |
Voltage | 110V/220V |
Power | 1.4kW~1.7kW |
Time Range | 0-60sec. |
Max. Temp. | 245 C degree (473F degree) |
Printing Area | 380mm x 380mm (16" x 20") |
Under Plate | Draw-out available |
Swing-away | Yes |
Air Compressor | Required |
PrintingThickness | Up to 53mm |
Gross Weight | 100kg |
Package Size | 1030mm x 700mm x 770mm |
pneumatic swinger heat press machine Application of scope:
T-shirt, Puzzle, Mouse Pad, Metal Board, Coaster, Slipper, Bag, Cushion, etc.
pneumatic swinger heat press machine Features:
1. Solid steel framework & stainless steel hardwares.
2. Fully digital temperature & time control.
3. Automatic alarm, temperature & time recycle.
4. Teflon-coated thick heating platen, speed & even heater technology.
5. Pneumatic drive, labor saving and user friendly.
6. Swing-away, silde-out working table, thick heat press supported.
Strict Quality Control:
1. Each single heating rod is tested before being casted in an aluminum alloy.
2. Each single digital time & temp controller is tested before assembling.
3. All heat press pass high temp. test (200 C degree) for at least 20 minutes before packing.
t-shirt swing heat press machine Use Introduction:
1 Lifting the handle to machine the machine open. Putting on the products on the
working platform and testing
pressure if is appropriate, and not, need to adjust the pressure knob. (Turn the
knob clockwise to increase the pressure, counter-clockwise to decrease pressure).
2 Turn on the machine and ready to be products. (Heating process, please do not put
the products on the working platform in order to avoid bad roast)
3 Turn on the power switch, temperature controller began the self-test, after
self-test approximately 10 seconds to complete and enter the work state and then
setting the operating parameters is available, (First using, please set the desired:
the temperature, time, see attached time and temperature instrument panel operating
instructions)
4 Setting desired time and temperature. Machine starts to heat up heating (the
temperature rose to 200C degree takes about 15 minutes);
5 When the machine reached desired temperature,then put the products on the table,press down the hand knob, The machine starts automatic timing, after reaching the set time,
the machine alert tone, lift the handle to complete the last operation;
Note: For security reasons, the power supply should be single phase 3 lines.
Temperature setting: press the Up or Down keys to adjust the temperature. (Typically
170-220 C degree according to the material ) until the temperature flashes eight
seconds,the machine has recorded temperatures.
Time setting: Press down the pressure handle, closed machine, the timetable is lit,
press the up or down key timing required setting until the time flashes eight seconds,
the machine to record the time, then you can open the machine.