|
Packaging Details - Unit Type: set
- Package Weight: 24.000kg (52.91lb.)
- Package Size: 47cm x 29cm x 26cm (18.50in x 11.42in x 10.24in)
Packaging Details - Unit Type: set
- Package Weight: 24.000kg (52.91lb.)
- Package Size: 47cm x 29cm x 26cm (18.50in x 11.42in x 10.24in)
3 axis cnc lathe control system NEW1000TDb-3 & 2 sets 86HSM12N-BC38 stepper with driver (sample only,Just for dealer or service support ) Features: 1.Adopt Modbus technology, ARM technology, DSP technology and FPGA technology. 2.U disk and RS232 interface,U disk DNC function. 3.Network remote technology, online diagnosis system. 4.128M user program space,Infinite numbers of programs. 5.Max movement speed 300m/min, Processing speed 0.01~30m/min. 6.Interpolation cycle 2ms, control accuracy 0.1um. 7.Short line program pre-reading technology, to meet the high speed engraving cutting. 8.Intelligent man-machine interface. Function: Function | Parameter | Control axis | 2-axis~5-axis (X,Z,A,B,C) | Min set unit | 0.001mm | max set value | ±99999.999mm | Max speed | 60m/min | Feed speed | 0.001~30m/min | Manual continuous | One shaft or multiple shafts at the same time | Interpolation mode | Linear,Circular,thread | Tool ,tool compensation | Length compensation,tool nose radius compensation | Tool compensation input mode | Trial cutting measure input mode | Spindle function | Gear,dual analog control,rigid tapping | Hand wheel function | Fixed,external handheld mode | Handwheel processing function | Program handwheel processing function | Screen protection function | Have | Turret function | Row turret,auto turret total 99 pcs | Communication function | RS232,U disk interface | Compensation function | Tool ,backlash,thread pitch,radius compensation | Programming mode | Absolute,relative,mixed programming, | Limit function | Soft limit,hard limit | Thread function | Metric/inch system,straight thread,tapered thread ect. | Pre-reading function | Pretreatment of short lines 10000 rows | Password-protected function | Multiple layers of password protection | Input and ourput | I/O 56×32 | PLC programming | User design PLC function by themselves | Acceleration/deceleration control | Linear acceleration and deceleration, exponential acceleration and deceleration | Encoder line | Any value can be set | User Macro program | Have | Electronic gear function | have | Deputy Panel | Type A Panel with handwheel, Type B Panel with band switch. |
System instructon G code: Code | Function | G00 | Rapid positioning | G01 | Linear interpolation | G02/G03 | Circular interpolation | G32 | Tread pitch cutting | G90 | Cylindrical or conical cutting cycle | G94 | End surface cutting cycle | G92 | Thread cutting cycle | G93 | Tapping fixed cycle | G71 | Excircle rough turning cycle | G72 | End surface rough turning cycle | G73 | Close cutting cycle | G74 | End surface deep-hole drilling processing cycle | G75 | Outer diameter grooving cycle | G76 | Multiple tread cutting cycle | G22,G800 | Fixed cycle | G52 | Part coordinate system setup | G31,G311 | Check skip instruction | G15,G16 | Polar coordinate programming | G20,G21 | Metric/inch system programming | G184,G185 | Setup tool coordinate system | G54~G59 | Work piece coordinate system setup | G40,G41,G42 | Tool nose radius compensation instruction | G60/G64 | Accurate positioning/continue feed cutting | G96/G97 | Constant surface speed cutting | G98,G99 | Feed mode | G26 | Return to program coordinate | G25,G61,G611 | Return to G25 point instruction | G28 | Return to reference point | G04 | Delay instruction | G65,G66,G67 | Macro command | S,M,T | S,M,T function |
Installation DIM.(mm): Application: Lathe machine,Grinding machine,Planer,some kinds of heavy-duty special purpose machine tools,etc.
|
|
|
|
|