Packaging Details
- Unit Type: piece
- Package Weight: 0.018kg (0.04lb.)
- Package Size: 2cm x 2cm x 2cm (0.79in x 0.79in x 0.79in)
ow.productDescripti
2-way PWM, pulse frequency, duty cycle adjustable modules, square wave rectangular wave signal generator ,stepper motor driver
1. Two independent PWM generators can set the frequency, duty cycle;
2. The wide frequency range, high accuracy;
3. Can serial communication.
Frequency is divided into three ranges:
1. XXX (no decimal point): the smallest unit is 1Hz, the range 1Hz ~ 999Hz;
2. XX.X (decimal point in ten): The minimum unit is 0.1Khz; the range of 0.1KHz ~ 99.9KHz
3. X.X.X. (there are three decimal point): the smallest unit is 1Khz; the range 1KHz ~ 150KHz
Frequency display example:
"100" indicates that the PWM output pulse of 100Hz;
"54.1" indicates that the PWM output pulse of 54.1KHz;
"1.2.4." Indicates that the PWM pulse output 124KHz
Duty Cycle in the range: 0 to 100;
Three frequencies duty cycle is the same, all the parameters non-volatile.
1. Working voltage: 5--30V, support micro USB 5.0V power supply;
2. Frequency range: 1Hz ~ 150KHz;
3. The frequency accuracy: ± 2%;
4. Output Current: <30mA;
5. Output amplitude: Default 5Vp-p (settable);
6. Operating temperature range: -30 ~ + 70 ¡É.
7.Weight£º8g
Module has three buttons [Set], [Up], [Down];
1. Press [Set] key to switch the display four parameters (FR1: PWM1 frequency; dU1: PWM1 duty cycle; FR2: frequency of PWM2; dU2: PWM2 duty cycle), before the handover parameters, there will be corresponding parameter name flash.
2. Press [Up], [Down] keys to modify the current parameter value (long press can quickly add or subtract fast).
3. Two PWM each have three preset frequency, the frequency display interface, long press [SET] key to switch between three types of frequencies, three kinds of frequency duty cycle is the same value. (XXX: range 1Hz ~ 999Hz; XX.X: range 0.1Khz ~ 99.9Khz; X.X.X .: range 1Khz ~ 150Khz,).
1. As square wave signal generator which generates a square wave signal;
2. to provide a signal to the stepping motor driver;
3. Adjustable pulse generation for chip use;
4. produce variable pulse signal, the control-related circuit (PWM dimming, speed).
Baud rate: 9600 bps
Data bits: 8
Stop bits: 1
Parity bit: none
Flow control: none
"S1FXXXT": setting PWM1 frequency of XXX HZ (001 ~ 999)
"S1FXX.XT": set the frequency of PWM1 XX.X KHZ (00.1 ~ 99.9)
"S1F: X.X.X.T": setting PWM1 frequency of XXX KHZ (0.0.1 ~ 1.5.0..)
\'S1\': PWM1
\'S2\': PWM2
\'F\': Frequency
\'D\': Duty Cycle
\'T\' is the end flag
"S1DXXXT": setting PWM1 duty cycle XXX; (001 ~ 100)
"S2DXXXT": set PWM2 duty cycle XXX; (001 ~ 100)
Setting successful return: DOWN;
Setting failback: FALL.
`;