Packaging Details
- Unit Type: piece
- Package Weight: 0.75kg (1.65lb.)
- Package Size: 15cm x 15cm x 10cm (5.91in x 5.91in x 3.94in)
1 x RYC-GRBL-V3 GRBL LASER/CNC Controller
3 x TB6600 1 Axis stepper motor driver board
3 x signal cables
1 x USB Cable
1x CD(Instructions, wiring diagrams, LASER/CNC software, configuration files, etc.)
This is a GRBL open source code-based laser, can be used for Laser Engraving machine, CNC Engraving Machine etc.
TB6600 1 Axis driver board uses a new original Toshiba TB6600 chip, stable, locked without any noise. Radiator shell is enough big, the cooling effect is very good!
Send free four white plastic Isolation column, enabling customers to a fixed support, isolation driver board very convenience!
GRBL LASER/CNC Controller Features:
1.Application:use for DIY Engraving machine or Toy laser engraving machine, need external connect stepper motor driver, suitable for users who make large stroke engraving machine.
2.Applicable software: GRBL control, Un Gcode Sender, GRBL controller, or other software that supports GRBL code
3. The maximum pulse frequency of the control board: 30KHZ
4.Communication: USB (USB-CH340).
5.Power supply: voltage: 12V,
6. Applicable to stepper motor driver: as long as the stepper motor driver with direction + pulse signal control can be used.
7.Support stepper motor: Determined by the external connect driver, the stronger of the driver\\\`s capability, the larger motor that can be connected
8.Laser interface: 12V, suitable for 12V laser head
9.Spindle motor interface: the maximum support 400W DC spindle motor.
10.With fan interface and TTL signal output interface (for controlling the laser module with TTL module).
11.Limit interface: X Y Z limit interface, can be connected to NPN photoelectric sensor
12.Probe interface: for Z axis tool zero.
13. Can connect emergency stop switch. In an emergency, the MCU can be reset to stop the machine.
Installation Dimensions:
TB6600 1 Axis stepper motor driver board\\\`s features:
1.DC power input type:12V~40V;
2.Output current:0~4.5A, stepless adjustable;
3.Mircostep:1,2,4,8,16;
4.Automatic half current function: half or full current can be Selected through the switch;
5.Protect form : Overheated protection, over-current protection;
I/O Ports:
1.24V+:DC power positive pole
2.GND:DC power cathode
3.A+ A-:Stepping motor one winding
4.B+ B-:Stepping motor other winding
5.CLK-:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)
6.CW-:Stepping motor direction input, voltage level touched off, foreward , low reverse
7.ENA-: motor free
8.+5V: Signal common terminal
Electrical Drawing:
\`
-->