Packaging Details - Unit Type:Set
- Package Weight:0.2kg (0.44lb.)
- Package Size:5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in)
Packaging Details - Unit Type:Set
- Package Weight:0.2kg (0.44lb.)
- Package Size:5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in)
t; Please tell us you need it 315MHZ or 433.92MHZ Here is only Receiver for Professional, Receiver without the transmitter Here is only Receiver without the Transmitter First of all, you must make sure your own transmitter frequency is 315MHZ or 433.92MHZ what is the IC Chip Number our receiver is learning code, it can learn most of Fixed Code and Learning Code Transmitter, IC Chip like this (2262 2264 2260 2240 1527 etc) it can not work with rolling code transmitter Model : DK-4TC 1.Working Voltage: DC12V/24V (Adjust by jumper) 2.Current:Standby less than 6mA, Working less than 128mA 3.Working Temperature: -10\`C?+80\`C 4.Receiver Frequency: 433.92MHZ 5.Receiving Sensitivity: -105dB 6.Output State: Switching Value 7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A 8.Receiver Board Size:70*50*18mm 9.Case Size:75 * 55 * 30mm Encoding Type: Learning Code Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board, Momentary-----Jumper on 1 Pin or Take away the Jumper Toggle--------Jumper on "3&4" Latched-------Jumper on "1&2" 2CH Momentary 2CH Toggle----Jumper NO.1 on "1&2" , Jumper.2 on "3&4" Momentary-----Press the transmitter button A,the receiver relay A is ON; Release button A ,The receiver relay A is OFF ,The same as B/C/D Toggle--------Press the transmitter button A For 1 time ,the receiver relay A is ON; Press button A again,The receiver relay A is OFF ,The same as B/C/D Latched------ Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFF Press transmitter button B,the receiver relay B is ON,the relay A/C/D is OFF Press transmitter button C,the receiver relay C is ON,the relay A/B/D is OFF Press transmitter button D,the receiver relay D is ON,the relay A/B/C is OFF It mean ,Latched only can keep 1CH ON,and it will ofen have 1CH is ON Learning Method: Input Power for the receiver,press the learning button , LED indicator ON,Then press transmitter ,the LED indicator flash 3 times,It mean learning successfully. Clearing Code: Keeping press the learning button 8 seconds until the LED indicator OFF, It mean the code have been cleared successfully. Package included: 1*receiver (with cover) /set /piece /set /set /set /set /set /piece -->
|