|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- Áõ¸í¼: NONE
- ½º¸¶Æ® Ȩ Ç÷§Æû: NONE
- ±Ù¿ø: CN (Á¤Ç°)
¿É¼ÇÁ¤º¸[(200021498)pink]
We offer discount for large quantity. Welcome to contact with us!
Register and manage fingerprints: short press the setting button to register the first way to manage fingerprints, the power light and the corresponding indicator will flash quickly to enter the fingerprint registration state, put your finger in the collection area and press your finger, and then lift your finger when you hear a "beep" sound Press again to repeat this action repeatedly until there is a sound of music indicating that the fingerprint registration is successful. You can continuously register new fingerprints, if you do not register for a few seconds, it will automatically exit the registration state. Short press the setting key to register the fingerprint of the way to manage the fingerprint, the same operation. The fingerprints registered by the setting key are all management fingerprints. Register user`s fingerprint: After passing the administrator`s fingerprint, do not release your finger. When the power light and corresponding indicator light flash quickly and there is a music sound, put the user`s finger to register the fingerprint. When the music sound is heard, the fingerprint registration is successful. Continuous registration is possible New fingerprints will automatically exit the registration status after a few seconds if they are not registered. (The user fingerprint is stored in the location where the management fingerprint is located. When the management fingerprints in the two locations are the same, the user fingerprint added at this time is stored in position by default). Delete user`s fingerprint: Long press the administrator`s fingerprint for about 20 seconds. When you hear "di~" and music, the corresponding position indicator lights up, delete all user fingerprints in that position. When the management fingerprints of the two locations are the same, the user fingerprint at position is deleted by default.
Note: Long press the setting button for about 5 seconds, the power light flashes, you hear a long beep of "di~~", the indicator light is on, and all fingerprints in this position are deleted (including managing fingerprints). Restore factory settings: Long press any setting button and hear two beeps, all indicators are on, all settings are deleted, and the initialization is successful. Set the relay closing time: turn the knob (clockwise to extend, counterclockwise to shorten), the closing time is 0.5 to 60 seconds (more than 60 seconds is self-locking mode), the relay is contact output, switching signal, no voltage output. Self-locking mode: turn the S1 or S2 knob clockwise. After the fingerprint is passed, the relay closes and keeps; press the fingerprint again and then the relay is released; it can continue to cycle like this, and the relay is released after the power is off. Use: Press your finger, the relay will close after the fingerprint is passed, and the closing time is determined by the S1/S2 knob. Power supply: DC10-24V Standby current: less than 10mA Fingerprint capacity: 200 pieces Collection pixel: 192*192 pixel Image resolution: 508dpi Output: Relay (approved current 10A) Colour: black + silver Material: aluminum + PCB
Package Contents: 1 * Control boards and modules
Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
|
|
|
|