Waterproof IP56 euro 85/92mm mortise ttlock tuya wifi fingerprint electronic digital smart door lock
for aluminum door /sliding door/glass door with frame/Broken bridge/UPVC/Grill door
Parameters
Color Black/Silver/Gold
Material Aluminum alloy
Unlock ways Fingerprint/password/Card/key/tuya wifi or ttlock
Door thickness 38-75mm
Battery 4*AAA
IP rate IPX6
Product size 36*320*24mm
Packaging data 41*21.8*8.8cm/2.2kg
Mortise 3585 mortise included ,92mm is compatible
Products installation video
**Following is translation file of the video
Installation Tutorial
ìé¡¢Adjust the direction of the front lock handle£¨default direction is right£©
1. Adjust the direction of the handle according to your demand, and unscrew the screw
2. Pull out the handle, turn the handle 180 degrees and insert it again, be careful not to press the wire inside the handle
3. Tighten the screws
4. The adjustment is completed when the handle rebounds
죡¢Adjust the direction of the rear lock handle
1. Adjust the direction of the handle according to your demand, and unscrew the screw
2. Pull out the handle, turn the handle 180 degrees and insert it again, and screw on the screw.
3. The adjustment is completed when the handle rebounds
ß²¡¢Following installation steps
1. Right open door: R faces the triangle symbol
2. Left open door: L facing the triangle symbol
3. Install the square column: Pay attention to the points on the square column and stuck it into the small hole
4. Install the lock body, screw on the screws, install the lock cylinder, and screw on the screws
5. Install the front lock, pay attention to pass the cable line through the door hole first, so as not to break the line.
6. The square bar is cut according to the thickness of the door, and the square bar is measured from the surface of the interior door, and the reserved length of the square bar is 1.5-1.8cm from the surface of the interior door.
7. Connect the front and rear power cables
8. Organize the excess power cable and stuff it into the door gap.
9. Install the rear lock and align it with the square bar
10. Install the rear lock screws, align the front and rear locks, and then tighten the screws
11. Install the battery
12.If want to reset the factory setting, press and hold for 5 seconds at the rear lock hole.
13. Done, test the lock
Notes: There is film on the surface of the keypad,when using,you can tear off the films.
Instructions summary of tuya wifi version
(1) Press " * # " to enter the setting menu
(2) Press "*" to return to the previous step
(3) Press "#" key to exit and confirm
(4) Press " * # " to enter the setting menu,then press the orginal password "123456#" , then you hear the voice of
¨ç1 New user--then enter the administrators of password(2 times), card and fingerprint(press 5 times,when registered a fingeprint,please change another finger to register, not the same finger)
¨è2 Delete user
¨é3 System settings (system setting include:1 Time setting, 2 Volume adjustment, 3 Verification mode, 4 Language selection, 5 Installation settings:passage mode or not passage mode)
¨ê4 restore factory settings----press 4+# to restore the factory settings
(5) 1# enters the network state, 2# deletes the network, 3# or the doorbell enters to request remote unlocking, 4# enters the tamper-proof alarm setting
(6) Instructions for connecting to tuya wifi
¨ç Step 1: Register administrator: follow the above steps£¨4£©
¨è Step 2:Input "1#" on the main board of the lock, and the voice will broadcast "Please enter the administrator authorization"
¨é Step 3:Input: administrator password
¨ê Step 4:The lock plate automatically will be the network state
Physical pictures:
We can also provide gold color Aluminum/UPVC smart door lock,if need this color,please make a note.
Notes:
1. The 85mm mortise is a single point type(picture as below),If need mutli points type or can not choose suitable backset of 85mm mortsie,please contact me!
2. If need 92mm mortise,only 3092 or 3592 optional, 92mm mortise is a single point type(picture as below), if need multi-point and different backset of 92mm mortise,please contact me!
3. When you place an order with no mortise, please check your orginal mortise works with smart door lock,if your orginal mortise worked with mechanical door lock, you need buy our smart mortise which can work with smart door locks, thanks.