with capacitive touch screen monitor
With HDMI+VGA+DC+touch USB
If you need other interfaces and other questions, please contact our customer service. Thank you
Datasheet for our 3mm bezel aluminum 15.6/18.5/19/21.5 inch thin flat lcd PC monitor:
Size£º15.6/18.5/19/21.5 inch
Panel Type£ºIndustrial Touch Screen LCD Monitor
Resolution£º15.6/18.5 inch (1366*768 ),19 inch (1280*1024),21.5(1920*1080)
Interface:Optional VGA£¬DVI+VGA£¬HDMI+VGA
Luminance|£º250nit-400nit£¨The default is 300cd/m2£©
Response time£º5ms
Display colors:16.7M(8-bit)
View angle:80/80/80/80
Other parameters
Input power: 100-220V AC 50/60H
Output power: 12V 3-5A
Whole machine power consumption: <26W
Standby power consumption: <3w
Working temperature: -20¡É-70¡É
Working humidity: 0%-90% (no cold doubt)
Storage temperature: -40¡É-85¡É
Storage humidity: 10%-95% (no cold doubt)
Product Size
Size:15.6 inch Resolution:1366*768 ppi
Size:18.5 inch Resolution:1366*768 ppi
Size:19 inch Resolution:1280*1024 ppi
Size:21.5 inch Resolution:1920*1080 ppi
Screen is waterproof and dustproof
Sensitive touch makes it easier to use
Ten-finger capacitive touch, support a variety of gesture touch, sensitive response, touch no blind spots, suit
able for various fields
Runs 24 hours a day
Using industrial-grade motherboards, imported full-solid capacitors, the power consumption of the whole machine is <48W, the design concept of energy saving and low consumption with special technology, and supports 24 hours of uninterrupted and stable operation to ensure production efficiency, saving electricity = saving money
Industrial-grade sheet metal heat dissipation design
Heat dissipation through the metal back shell, technological breakthrough, low noise, better heat dissipation effect, strong stability, and effective protection of the life of the whole machine accessories
High and low temperature resistant design
The front frame is processed by high-precision CNC, and the steel body is forged by cold-rolling technology, which greatly increases the rigidity and compression resistance of the whole machine. It has been tested by a strict temperature control box and runs stably in harsh environments with large temperature differences.
Industrial protection technology
Easily adaptable to operate in a variety of harsh environments and meet high operational standards
Installation method
Easy to install, one-key boot
1. Embedded installation
¨ç The cabinet needs to be opened before installation, and the opening size should be slightly larger than the opening size specified by the product.
¨èPlace the product in the embedded installation opening reserved on the installation panel.
¨éThere are two square holes on both sides of the device. When installing, use one end of the buckle to buckle the square hole, and the screw head on the buckle to hold the cabinet.
Then tighten the screws. The installation method of the other three prescription holes is the same to complete the embedded installation.
2. Wall-mounted installation
¨ç Fix the wall bracket A on the wall with expansion screws.
¨èThe wall bracket B is installed on the back of the all-in-one with screws.
¨é Insert the back bracket of the all-in-one into the wall bracket to complete the installation.
FAQ (Frequently Asked Questions)
Q: Where can I install the touch driver?
A: www.EETI.com
Q: How to install the touch calibration program?
A: After connecting the monitor to your host, according to your host system, go to the website to download the corresponding touch driver, and then install the touch driver according to the prompts. After the installation is successful, perform the program screen calibration. If you buy a capacitive touch monitor, you can directly connect the touch USB cable.
Q: Is the machine waterproof?
A: Yes, the panel is waterproof, but it is not recommended to be immersed in water.
Q: What is the standard installation method?
A: Embedded, wall-mounted
Q: Does it support desktop installation?
A: Yes, but you need to buy a desktop stand