Too bright or in the day,the lamp doesn`t work.
It only works in dark environment or at night.
PIR Motion Sensor Lamp:When the bulbs turn on, it will flash 1 or 2 times, it is self-check, it need about 30-60seconds stability time for the infrared sensor, it Will be able to work properly.
Sound Sensor / Voice Induction Lamp: Lamp will light up continuously around 1 minute after connect with power, then turn-off automatically, please wait around 15 seconds for sensing mode starts.
PIR Motion Sensor Lamp
Base Tpye: E27
Input voltage: AC85-265V/220V
Wattage: 12W 15W 18W 20W
Detection range: ¡Â 3M
Color temperature:2700-6500K
Work principle:
When you in sensor range, it works about 40 seconds.
After 40 seconds, if you not move, the lamp not work.
Too bright or in the day,the lamp doesn`t work.
It only works in dark environment or at night.
Trouble removal:
Occasionally it can auto light up, may be there`s animal moving or the install angle is not correct.
The lamp is turned off every 40 seconds, and repeat it, you have to check whether a person or an animal moves, or take it to another room to check.
Sound Sensor Lamp
Specification:
Light Color: Cold White/Warm White
Connector type: E27
Power: 28W (Sound Sensor)
Voltage: AC100-240V
Work principle:
It works about 30 seconds.
After 30 seconds, if you not make voice, the lamp not work.
Too bright or in the day,the lamp doesn`t work.
It only works in dark environment or at night.
Trouble Removal:
When install it, it will auto light up and off, occasionally it can auto light up, the reason may be there`s bulb turns to hot place, or install angle is not correct.