Packaging Details
- Unit Type: piece
- Package Weight: 0.15kg (0.33lb.)
- Package Size: 15cm x 10cm x 8cm (5.91in x 3.94in x 3.15in)
1: Model: YYH-2 can control the DC motor forward and reverse, speed, timing, limit and other functions in one, to meet more application needs. There is a demonstration operation wiring video and paper manual for customers to use, to ensure that will use
2: Features: This product uses MOS tube H bridge circuit, high performance, input and output optocoupler isolation, the minimum can be 0.01 seconds frequent switching, no noise, can be 10 speed, far more than relay contact control, relay touch Point life limit, and there are sound, poor sensitivity, frequent contact easily burned relay contact
3: low power consumption: 15ma or so, you can set the low power mode, standby current is less than 10ma
4: input voltage range and controllable power: Input voltage: DC4.2V ~ 18V output can control the current within the 5A motor
5: time range: 0.01 seconds to 99 hours any time adjustable
6: speed range: a total of 10 files, the speed from 0% to 100% arbitrary speed
7: Terminal port description:
IN1, IN2: signal input (active low, negative trigger, can be connected NPN sensor)
DC-: power supply negative input (DC 4.2V ~ 18V wide voltage)
DC +: power positive input
M +, M-: output termination motor, regardless of positive and negative level
8: other common problems: A: all settings options can be automatically saved, set the contents of the power loss is not lost
B: can be frequently off, the performance is better than the relay, life than ordinary electromagnetic relay to long
9: Function list:
P-1: to signal, forward or reverse to the set time automatically stop
F-0: to signal 1, is to set to the time to automatically stop, again in the delay trigger invalid
To signal 2, reverse to set the time to automatically stop, again in the delay trigger invalid
F-1: to signal 1, is to set the time to automatically stop, in the delay period again
To signal 2, reverse to set the time to automatically stop, again in the delay time again
F-2: to signal 1, is to set to time automatically stop, again in the delay trigger reset, the motor immediately stop
To signal 2, reverse to set the time to automatically stop, again in the delay trigger reset, the motor immediately stop
P-2: Automatic positive and negative reversal time, signal 2 reset
F-0: automatic power infinite loop: forward, stop, reverse, stop .... forward and reverse time, like the same time to stop
F-1: signal 1 start infinite loop: forward, stop, reverse, stop .... forward and reverse time, stop the same time
F-2: Signal 1 starts once: forward, stop, reverse, stop, no loop, forward and reverse time, stop the same time
P-3: Auto forward and reverse without stop time, signal 2 reset
F-0: power automatically start the infinite loop: forward, reverse .... which reversal time can be different
F-1: signal 1 start infinite loop: forward, reverse .... which reversal time can be different
F-2: signal 1 start once: forward, reverse does not cycle, which reverses the time can be different
P-4: Limit function
F-0: power forward, encountered signal 1 (limit), immediately reversed, encountered signal 2 (limit), immediately forward, cycle
F-1: power forward rotation, encounter signal 1 (limit), stop for some time automatically reverse, encounter signal 2 (limit), stop for a period of time automatically forward, cycle
F-2: power forward rotation, encounter signal 1 (limit), stop for some time automatically reverse, encounter signal 2 (limit), stop for a period of time automatically forward, not loop
10: key settings Brief description: (during automatic timing, press the button to disable, to prevent interference or misuse)
Mode: long press: mode selection key P- * After selecting, press K2 to enter function
Short press: set the time, set the order in order: the first group of time, the second group of time, time unit settings
+: Display blinks: time plus or adjusts the first set of time units
Display does not flash when: small function selection key F- *, select the good, press the K3 into the function
-: When the display is flashing: Time is decremented or the second set of time units is adjusted
When the display does not blink, the display can be turned on or off permanently, reducing power consumption
Note: Time unit Description:
The middle two points flash (about 0.2 seconds once), display the value of the unit seconds: 0.01 seconds
The middle two points slow flash (about 2 seconds once), showing the value of the unit hours: minutes
The middle two points of normal flash (about 1 second time), showing the value of the unit minutes: seconds
Speed +: press to accelerate a file, a total of 10 files, the speed from 0% to 100% arbitrary speed
Speed -: press the deceleration of a file, a total of 10 files, the speed from 0% to 100% arbitrary speed
-->