Packaging Details - Unit Type: piece
- Package Weight: 0.15kg (0.33lb.)
- Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Packaging Details - Unit Type: piece
- Package Weight: 0.15kg (0.33lb.)
- Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
tyle="color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif; font-size: 13px;"> Driven plate models: JYQD_V6. 3E2 upgrade version of JYQD_V6. 3E1, the difference as below: The counter electromotive force circuit was changed to a single point of common-ground mode, increase the detection sensitivity and motor runs more stable. Increase the reliability of the power supply voltage stabilizing module, and have better electric shock resistance. Voltage range: 12 v - 36 v Peak Current: 20A Drive power:<= 500 w (depend on working voltage) Size: 63 MM * 42.5 MM * 17 MM, hole dia.=3mm Driver IC: JY01 Speed adjustment: voltage speed or single chip microcomputer PWM speed regulation Control terminals: GND, control terminal, ground VR, speed terminal 0-5V (corresponding to the motor speed 10% - 100%) Z/F, positive and negative control (5V or ground can change the motor rotation direction) Singnal, speed pulse output port, 1 circuit pulse=motor polar logarithmic x3 5V, control terminal 5V Motor wiring instructions: VCC (connected to power +) GND (connected to power -) MC (connected to motor phase W) MB (connected to motor phase V) MA (connected to motor phase U) No 1 picture: the normal operation of the motor waveform can be observed using the oscilloscope, The motor does not turn up, the current is too large, the motor jitter, are related to the motor Hall sequence, line sequence dislocation caused by the board does not match! No 2 picture: The picture shows the motor speed pulse signal, a different motor output pulse signal is not the same, please use the speed pulse signal pin, measuring the next round of the motor out of several pulse signal Package include: 1*Brushless DC motor control -->
|