aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¸ðµ¨ ¹øÈ£: 99
- Áõ¸í¼: CCC,ce,ROHS
- Àç·á: Metal
- º¸Áõ: Two years
- ÃÖ´ë ºÎÇÏ Àü·Â: 24V
- ±Ù¿ø: CN (Á¤Ç°)
- Ç°¸ñ À¯Çü: Á¶±¤±â
- Type: SD card
- Capacity: 128MB-2GB
- Power supply voltage: DC7.5-24V
- Power consumption: 1W
- Size: 159*89*24mm
- Working temperature: -30¡É-+85¡É
¿É¼ÇÁ¤º¸
[(365458)ºê¶ó¿î]Storage card:
Type: SD card
Capacity: 128MB-2GB
Save file: *.led
Controller parameters:
Working temperature: -30¡É?+85¡É
Power supply voltage: DC7.5-24V
Power consumption: 1W
Data transmission port: 3pin terminal block
Weight: 0.35kg
Size: 159*89*24mm
ìé. Features of T-1000S system
1. Level 32-65536 gray level control, software Gamma correction processing.
2. Support various point, line and surface light sources, support various rules and special-shaped processing.
3. A single port output of the controller can be equipped with 2048 lights.
4. Multiple units can be cascaded to synchronize offline control, and the playback content is stored in the SD card.
5. T-1000S can store 16 files at most, just copy multiple files to SD card one by one.
6. The effects stored in the SD card should be named in order: 00_1.led, 01_1.led, 02_1.led.
7. Compatible with single- and dual-wire ICs. When connecting single-wire IC lamps, there is no need to connect the CLK clock line.
Remarks:
1. When the T-1000S port is loaded with 512 lights, the playback speed can reach 30 frames per second. When the port is loaded with more than ? ? ?512/1024 lights, the frame rate will automatically decrease as the number of lights increases.
2. Control the 32-level grayscale IC, and the frame rate can reach 30 frames per second when the single port control is less than 1024. When controlling ?a 256-level grayscale IC, the frame rate can reach 30 frames per second when a single port is controlled less than 512 pixels.
?T-1000S must be used with LedEdit2012, the old version of the software does not support the 2012 version of the controller.
ì£ . Support chip
:
ß² . Appearance picture:
ÞÌ , the meaning of the keys:
çé . Wiring method
1. T-1000S controller can be used in cascade connection;
2. T-1000S is a single-port output, with a maximum of 1024/2048 pixels;
3. When controlling a single-wire IC, you only need to connect the DAT and GND of the controller to the DAT and GND of the lamp. When controlling a two-wire IC, you need to connect the DAT.CLK and GND of the controller to the DAT, CLK and GND of the lamp.
4. When using a differential signal (485 signal), the output signal A and B of the controller are connected to the signal line A (DAT+) and signal line B (DAT-) of the lamp respectively.
5. When the voltage required by the controller is the same as the voltage required by the lamp. The controller and lamps can be directly connected to the same power supply. When the voltage required by the controller and the lamp is different, the lamp and the controller can each be powered by a power supply.
6. When creating a new project in the effect editing software, select the control model as: T-1000-IC model