Packaging Details
- Unit Type:Set
- Package Weight:0.9kg (1.98lb.)
- Package Size:15cm x 15cm x 15cm (5.91in x 5.91in x 5.91in)
;
Product list: Table saw spindle *1
Chuck (optional) *1
775 motor *1
118XL synchronous belt *1
Synchronous wheel *1
Length 10cm
Can be used within 4 inches of the saw blade
Gear with 20 teeth inner hole 10mm
GB 118XL belt
118XL belt pulley includes: 118XL synchronous belt, +5mm/10 teeth of motor gear(Not suitable for all motors. Other sizes are required. Please contact the seller and provide the motor type.)
Basic motor parameters (unit: mm) | |
Model | 775 | Place of Origin | domestic | weight | 355 | Condition | Brand new | |
Shaft diameter | 5MM | Long axis | 17 | Fuselage length | 66.7 | Stepped diameter | 17.4 | Foreground height | 4.7 | |
Fuselage diameter | Forty-two | Motor length | Ninety-eight | Diagonal hole spacing | 28.8 | Changan hole spacing | nothing | |
Mounting hole size | M4 | Mounting hole | 2individual | Cooling fan | Yes | |
Motor performance parameters (no load) | |
Rated voltage (V) | 24 | Rated current (SAFE) | 0.16 | Rated speed (Rev / min) | 7000 | |
Parameters under different voltages | Voltage | DC 12 volts | Electric current | 0.14 | speed | 3500 | |
Voltage | DC 18 Volts | Electric current | 0.15 | speed | 4500 | |
Voltage | DC 24 volts | Electric current | 0.16 | speed | 7000 | |
Voltage | DC 30 volts | Electric current | 0.17 | speed | 8100 | |
Voltage | DC 36 volts | Electric current | 0.20 | speed | 9000 | |
This motorFront bearing,Copper sleeve5 sets of winding, 24V voltage, torque, small noise. Motor step height: 4.5mm |
Motor step diameter: 17.5mm
Output shaft length: 16mm (horizontal axis above the step length)
Shaft diameter: 5mm axis (edge 1.5mm, edge length 13mm)
Motor diameter: 42mm
Motor length: 66.5mm
Motor tail step height: About 11mm
Motor tail shaft length: about 5mm
Mounting hole spacing: about 28.8mm
Mounting hole diameter: M4 screw
Single weight: 355G (G/ g)
Rated voltage: 24V
Actual voltage: 3-60V (do not ask whether there are three kinds of 12V24V36V voltage)
Really large torque, 3.7V test speed is not fast but the torque is really great. Using this motor to drive micro pump is preferred
![](http://freeship.co.kr/images/notice0.png)
-->