Nostalgia is always a beautiful thing. I made tape recordings and recorded beautiful testimonies. The old tapes are reluctant to lose, because the things inside are our most precious. Now you can convert them into MP3 and store them on your computer or other digital devices. In the device.
Note: This product cannot be placed or charged
Equipment function:
1. Convert music or English listening on old tapes to MP3. Don`t worry, never lose again...
(Transfer directly into the computer with a data cable, there will be no environmental noise, and it is as good as the original sound of the tape.)
2. It can also be used to listen to tapes, but you need to wear headphones (because there is no speaker, but it comes standard with a high-quality earphone)
Convert old tapes to MP3 format, output to a computer, play on a computer or IPOD, or make it into a CD for storage.
Support system: Windows XP, Win7, Win 8, Win10
Includes audio editing software
Accessories include:
1x tape drive
1x manual
1x USB data cable
1x earphone
1x CD (including audio editing software and operating instructions)
Software installation and usage instructions:
The audio conversion software is the "Audacity.exe" file in the CD, double-click it to run
After the installation is complete, start the software and start recording:
You can click the "Stop" button halfway to end the task.
When recording, the wavy line as shown in the above picture indicates that the recording is successful.
After recording, it supports exporting three audio formats: WAV, MP3, Ogg Vorbis;
Note: He supports multiple languages. Some of the installations are in English and some are in Chinese, which are based on the system. The automatic installation of the English department is English, and the automatic installation of Chinese is Chinese.
Edit-parameter setting-interface,
During the acquisition process, some cannot hear the sound because the parameter setting is not selected properly. Edit-parameter setting, choose according to your situation.
Small door: After installing the software, usually the software is opened by itself, first close the software; connect the product to the computer with a USB cable, and then open the software. At this time, the parameter setting should be as shown in the figure below. Select "USB Audio Device" for both devices.