1-6N.m 1/4 Inch(6.3mm) Drive Preset Torque Wrench Spanner Hand Tool Click Torque Wrench Alloy Steel Knurling Handle Precision
-
Torque Range:
1-6N.m
-
Head Type:
Reversible Ratchet
-
Feature:
Quick Release Button
-
Handle Type:
Knurling Design
-
Drive Size:
1/4 Inch/ 6.3mm
-
Surface:
Chrome Plated
-
Wrench Type:
Click Torque Wrench
SETTING TORQUE
1. Pull the lock knob out downside. The locking and unlocking directions are indicated by appropriate icons on the lock knob.
2. Turn the grip in the clockwise direction to increase the torque, and in the clock wise to decrease it.
3. The major scales show the amount of torque in both primary and secondary units. The major scale shows fine increments in primary units.
4. Push the lock knob back to lock the grip. The minor scale may move a small amount to either side of the centerline mark without affecting the sccuracy of your setting. Make sure that you adjust the wrench to the exact torque units your specifications call for, or you will severely under-torque or over-torque, causing severe damage to the equipment you are working on.
5. Do not disassemable the wrench for any reason. Highly stressed internal components may cause severe injury when released in an unintended manner.
6. The wrench should be re-calibrated periodically. The calibration of the wrench should be checked at least once a year, after any abnormal handling or overloading, or after 5000 cycles(clicks)
THE BELOW PHOTOS ARE ONLY EXAMPLES OF SETTING!
Overall Size