Packaging Details - Unit Type:piece
- Package Weight:3.0kg (6.61lb.)
- Package Size:30cm x 20cm x 20cm (11.81in x 7.87in x 7.87in)
Packaging Details - Unit Type:piece
- Package Weight:3.0kg (6.61lb.)
- Package Size:30cm x 20cm x 20cm (11.81in x 7.87in x 7.87in)
tyle="margin:0 auto;"> 978840226865969 More Hot Products This item is over 2KGS,No economy air mail post could be used for the delivery,we will choose fast shipping with for you. Model: WH166 DH160 Canister Diving Video Light Bulb: White CREE XM-L2 U2 LED *8 (max 5200 Lumens); Red CREE XP-E N3*4 (wavelength 620nm, max 400 Lumens) Modes: High>Low>Red> off Runtime: High (3.0h); Medium (4.0h); Low (10.0h); Red (10.0h) Color temperature: 5000K (white light); Reflector: No hotspot design, no reflector; Lens: 5mm Polycarbonate Board; Light head: with mounting connector default one light read, can use two light heads also. (optional) Body material: Durable aircraft-grade aluminum. Angle of light beam : 120°; Surface treatment: Premium Type III hard-anodizing. Color: Black Battery: rechargeable Li-ion battery pack (26650 battery *8) Battery Indicator: 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off; Can be charged directly on the light, with battery over-discharging protection Fully charging time: 8-10h; With gas release valve Operation voltage: 12V to 18V; Waterproof: 150 meters underwater Dimensions: 244.5mm (canister length)* 78.2mm (dia. Of canister) * 56.5mm (dia. Of light head); Weight: 2230 grams (with battery pack) Underwater Weight: 1100 grams (with battery pack) Impact resistance: 1.5M. BATTERY CHARGING 1. Plug the charger in the wall power socket, the indicator light is green in the free-load status. 2. Open the top cover of the canister plug the plug of the charger in the ports on the canister. (the positive and negative polar doesn\`t matter, both ways work.) 3. The indicator light on the charger is red if the battery is not fully charged; it will turn green after fully charged. 4. Take out the charger, put the cover on the canister and use the light. MODES CHANGING Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF. SCUBA DIVING APPLICATION Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces. KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE. CAUTION Please put the switch on the canister to the position of "OFF" during transportation to prevent it from misoperation. If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water. Please charge the light every time after using. If it isn\`t used for a long time, please charge the light once every 3 months to prepare for next time using -->
|