|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- Áõ¸í¼: ¼¼·ý
- ±Ù¿ø: CN (Á¤Ç°)
- ½º¸¶Æ® Ȩ Ç÷§Æû: NONE
- ¸ðµ¨ ¹øÈ£: MCB-150
¿É¼ÇÁ¤º¸[(10)1 pair]Wired Waterproof Outdoor 150 Meters Detection Distance Microwave Beam Detector Perimeter Barrier for Factory?Farm House Security Perimeter Microwave Detection SystemMicrowave detection systems are an effective means of intruder detection where an outdoor site either has no perimeter fencing or has an open space beyond/within the perimeter. A good example of this would be a storage depot with items stored out in the open accessbile via an open space within the perimeter boundary.?
Features:
Detection Range: Up to 150m Detection human intruders walking running or crawling Quick and easy installation on pole fence or wall Operating Temperature: -40o?to +65o Power Input 10.2~30VDC High RFI EMI Immunity Protection form: direct sunlight, wind up to 30 m/second, snow and rain?precipitation (up to 30mm/hour), small animals, ground swing, snow and?grass up to 0.3m. Send alarm signal?when human intruders walking, running or crawliling with?speed from 0.2 till 10 m/s, applying 5-30 Volts from control unit to the terminal?marked. TEST(on the transmitter unit),power supply voltage less than 10.2V,?transmitter or receiver cover has been opened or destructed,?electromagnetic masking of the receiver.?
Specifications:
microwave frequency | 10.525GHz | modulation frequency | 1.0KHz | maximum transmitting power | 35mW(continues) 50mW(peak) | scope(length of protection zone) | Max.150m | lobe width | approx.5m | lobe height | approx.2.5m | rated power supply voltage | 12-24V | range of power supply voltage | 10.2-24V | current consumption | 70mA at 24V DC | relay contacts values | NC 28V DC, maximum current 0.1A | alarm period | 3 sec ( max.) | tamper switch | NC 28 V DC maximum current 0.1A open when cover is removed | detection speed(target velocity) | 0.2-10m/sec | remote testing | built in self test generator simulates acutal intrusion signals | flatness of ground | approx.0.3m | maximum height of grass on the ground | 0.3m | maximum height of snow on the ground | 0.5m | alarm output-switching over of relay contacts for the time | minimum 3 sec | dimension of unit(trans./rec.)w/o bracket | 158*113*46mm | weight(T,R and accessoires) | 1.5kg | operating temperature range | -40oC-65oC | ralative humidity | up to 98% | weatherproofing | all openings with gasket and sealed conformal coated circuit board aganist snow and rain up to 30mm/hour. |
Installations:
Cross Installations:
In order to avoid dead zones under aerials, and to increase the protected area. it is possible to install multiple MCB-150 systems connected together with overlapping. overlap configurations are performed with the units located at the angles of protected area. the minimum overlap for sufficient coverage must be at least 1.5-2M. the optional way is to install transmitters (T) only or receivers ( R) at the point of overlap.
Wiring:
What's in package:
1pair wired?Microwave Beam detector and?1pc?LCD Microwave?Tester.
Note: ?this is wired microwave beam detector, can connect to any alarm which support?wired zones.
|
|
|
|
|