PACKAGE : 10PCS X REED
Open type plastic tube of 30mm---- size 6x30mm length 300mm maximum voltage and current 200V 0.5A
Normally Open Tube 6X15mm--Plastic Sealing Part Size 6x15mm Line Length 300mm Maximum Usage Voltage and Current 100V 0.5A
Normally open tube body 4X18mm - plastic part size 3.8X18.6mm line length 350mm maximum usage voltage and current 24V 0.1A
Normally Closed Tube 6X30mm - Plastic Sealing Size 6x30mm Line Length 300mm Maximum Usage Voltage and Current 175V 0.25A
Normally open and normally closed tube body 6X30mm - plastic encapsulation size 6x30mm line length 300mm maximum usage voltage and current 175V 0.25A
Product picture:
Working principle
The proximity switch is connected by a warp reed and is shaped and packaged. When the magnetic body approaches, the switching action is caused, and is generally used as a position sensor.
Characteristic
Small size, easy to install, reliable performance, ABS shell, wear resistance and high temperature. No standby power consumption,
The installation of the seal is stable and the magnetic sensors can still be used when the optical sensors are not working properly because of the bad environment,Easy to install and easy to adjust
Application range:
Measuring instruments, office automation equipment, household items, security and safety equipment, transport equipment.
Product specification:
Product parameter:
|
|
Operating distance |
|
Shell material | Imported qualityABS |
Fixed mode | Embedded system |
Note: normally open type, that is, the usual state is disconnected, when the magnet is close to the signal, and, on the contrary, the magnet departure signal.
The normally closed type, that is usually closed state is conducting, magnet near disconnect signal, on the other hand, leave the magnet conduction signal is given.