Feature:
[1] Coverage: 500-1000 square meters without barriers
[2] Improve Cdma 850 and DCS / Lte 1800 at the same time
[3] Support more than 20 cell phones to use at the same time
[4] Support different operators which has CDMA 850 and 1800 frequency band
[6] LED signal light indicates the signal status.
[7] One Year Warranty; CE and ROHS certificates
?
Specification:
Repeater:
[1]Gain: 75dB(DL) ; 70dB(UL)
[2]Output power:23dBm
[3] CDMA: up link 824-849mhz; down link 869-894mhz
DCS: up link 1710-1785mhz; down link 1805-1880mhz
[4]Impedance: 50ohm
[5]Connector Type: N female connector
![](https://ae01.alicdn.com/kf/S4539e81cc723435a84af33f44ae9f799f.jpg)
![](https://ae01.alicdn.com/kf/S53da8307b7d24693afb2499aaf05bdfdO.jpg)
![](https://ae01.alicdn.com/kf/S9650bf52055d4028a39ada84e31b13482.jpg)
![](https://ae01.alicdn.com/kf/S39639bf0af5740a6a590dc6edeafc7cdX.jpg)
![](https://ae01.alicdn.com/kf/S4a394efc5b9d457aa88b9325e9b5f98fr.jpg)
![](https://ae01.alicdn.com/kf/Sa1d4688202f84691864d8eddec64e75cP.jpg)
?
Outdoor Antenner:
Gain:11dBi
Frequency:698-2700MHz
![](https://ae01.alicdn.com/kf/S5ee24083550443e98a2fdc7a5e83d1c4r.jpg)
![](https://ae01.alicdn.com/kf/S80e132b00cc64c67a7359f2a5ee5023bd.jpg)
?
Indoor Antenner:
Gain:5dBi
Frequency:698-2700MHz
![](https://ae01.alicdn.com/kf/Sa7b2acac2322483fb22ae7a2ca41f314l.jpg)
![](https://ae01.alicdn.com/kf/S6330f5476dca453b882792ae91a6c552e.jpg)
?
5M-Cable
?
?
![](https://ae01.alicdn.com/kf/S389cca9371274ce0a1a5770182865a1eT.jpg)
1M-Cable
![](https://ae01.alicdn.com/kf/S591e30d464de467eae63e3d42d35114az.jpg)
15M-Cable
![](https://ae01.alicdn.com/kf/Se81b72b24f64407ebe8fd598f3c9f8d3X.jpg)
2 Way Power splitter
Frequency:700-2700MHz
![](https://ae01.alicdn.com/kf/Sf780dedb76234a5fb9085b2f9ff9fa2dR.jpg)
![](https://ae01.alicdn.com/kf/S14b5de7d80f045e6887966ef15d034c23.jpg)
Easy Setup in 5 easy steps!
[1] Install the external antenna at the strongest signal on the phone, usually on the roof or attic.
[2] Run a coaxial cable (15 m) between the base unit and the external antenna. The external antenna should be connected to the "BS" end of the repeater.
[3] Run coaxial cable (1 meter) between the power splitter and the basic unit.
[4] Connect the two built-in antennas to the two ports of the power splitter. The two internal antennas and the power splitter respectively run a coaxial cable (5 meters), which are placed at the position where the signal needs to be improved.
[5] Connect the power supply to the amplifier base unit and plug it into a power outlet, and you`re done!
?
?
Packaging Including:?
(1).Booster
(2).Log Periodic Antenna
(3).Indoor Ceiling Antenna X 2
(4).Power splitter
(5).15M Cable
(6).5M Cable X 2
(7).Power Adapter