Packaging Details
- Unit Type:Set
- Package Weight:1.0kg (2.20lb.)
- Package Size:18cm x 13cm x 5cm (7.09in x 5.12in x 1.97in)
;
Description:
1.This device is a VERSATILE RF signal detector which can detect most of GSM phone, smartphone, WiFi, wireless bug (hidden microphone), wireless analog and digital cameras and other wireless device during 50 MHz ~ 6.0 GHz.
2.This device applies with fuzzy scanning technology to detect peeping cameras,bug,cellphones and other radio frequency devices.This device surely avoids being peeped or tapped to protect privacy or protect information being disclosed secretly.
3.This device has a new digital amplifer to heighten the indication for the digital signals of
Bluetooth,WLAN, WiFi, cellphone and digital Spread Spectrum wireless products,etc.
◆ This device has 3 LEDs indicating the detected signal strength.When detecting cellular phone or peeping camera,the LED will light from Lecel 1 to Level 2 to Level 3, and the beeping sound will change from Slow to Rapid indicating the strength of detected signal.
◆ Sensitivity Adjustment
Turn the sensitivity tuner to - (minus) side to decrease the sensitivity and the detecting distance will be shorter.Turn the sensitivity tuner to + (plus) side to increase the sensitivity and the detecting distance will be longer.
◆ Interference (Backgrond Noise) Elimination
1.The sensitivity tuner is also used to eliminate the background noise(interference).
2. If the scan environment has other noises that interfere with your detector, the strength indication LED will light up.
3.If this condition appears, adjust the sensitivity by turning the Sensitivity Tuner to – (minus) side to decrease the sensitivity until the Level 1 put out,just the green Power LED lights up.
4.In normal condition, when turning on the power, only the power LED goes Green to confirm the detector is in normal condition.
◆ Wired Camera Detection
1.There is a Wire detection switch on the upper side,press down the red button,it will active the ultra-bright LEDs for scanning suspected areas.Press the red button again,the red light will put out.
2.Office or private room has a lot of metal or optical object with shinning surface which will reflect the illuminated light.Few more practices will help identify the lens of hidden camera.
3.When you find a suspected reflection,shake your detection light right-and-left slightly.If the location of the reflection shifts as you shifts,it is not a camera.
4.If the location of the reflection does not shift,then you might have discovered the lens of a hidden camera.
5.The ultra bright LED will blink once few seconds for indentifying the suspicious object more easily.
◆ Analog / Digital Select Switch
The signal of wireless camera, hidden microphone and walk talki are analog signal.
The signal of Bluetooth, WLAN, Wi-Fi, cellphone and digital spread spectrum products are digital signal.
Usually, set the A-D switch to A. When to detect analog signals, the LED of the detector will light up without blinking and the buzzer will go off continuously.
When to detect digital signals, the LED of detector will be blinking and the buzzer will go off dis-continuously and small sound. Set the A-D switch to D, it will have stronger indication for the digital signals of Bluetooth, WLAN, cellphone and digital spread spectrum wireless products, etc.
◆ Low Battery Warning
If your detector is switched on,and the LED in the bottom with a battery icon is Red, it means the batteries run down. Please replace new batteries.
◆ DISCOVER GSM / 3G BUG & SPY CAMERA
This device can detect and locate GSM / 3G bug (hidden microphone) and 3G spy camera which are applied GSM / 3G technology to be remote controlled by cellphone from anywhere.
◆ Specification
Features:
- Catching all the camera and Concealed microphone.
- Set the Wired switch on, it will activate the ultra-bright LEDs for scanning suspected areas.
- Hunting all the Cellphone, Wireless phone.
- 3 LEDs indication: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong).
- Warning mode: Sound, LED and Vibration.
- Sensitivity tuner for Distance adjustment.
- With earphone to detect without other\`s notice.
- Low battery warning.
- Sensitivity adjustment / Interference (Background noise) Elimination.
- With analog and digital signal detection switch.
Product Pictures:
-->