Note: this link product contains power, and the power supply for this link is 48V3000W!!!
(the diameter of the iron rod of a heated iron rod must not exceed 10mm).Can also be used with the melting pot of this shopgold,silver,copper,aluminumWait for metal. The crucible can hold 200 grams of gold, 100 grams of silver or copper. This circuit can directly heat iron, carbon steel, graphite, titanium alloy and other materials. The heating of copper, aluminum and stainless steel needs to contact the shop owner to customize the special heating ring. Graphite crucible as consumables, with the use will be oxidized to carbon dioxide, can be used more than 10 times. When the circuit works, the fan must be cooled and the copper pipe should be cooled by water.
Quenching suggested buying a set meal, smelting metal suggested buying packages two.
Voltage heating effect
24V can melt lead and tin with a crucible
36V Using a cruciblemeltAluminum.
48V using a cruciblemeltGold, silver and copper
Heating plate PCB size: 10x10 cmThe inner diameter of the heating ring is 40mm by default, and the crucible is 65mm.
Support the plug power line to consult the power seller.
Power picture:
Heating circuit:
Copper tube heating ring installation:
The design of the circuit is very good, so we have got the enthusiasm of the friends, they have attracted a lot of people to buy with the similar appearance and low price, but some stores use the refurbishment element to fool a lot of the players who have just started. For the Shanzhai shopkeeper is also helpless, can only appeal to buyers:
A set of crucibles:A graphite crucible,A quartz crucible,A lid of the crucible. Graphite crucible is placed in a quartz crucible
Package 1:Heating circuit, copper tube heating ring, fan (48V), base, water pump, water pump power adapter, silica gel tube.
Package 2:Heating circuit, copper tube heating ring, crucible, fan (48V), base, water pump, water pump power adapter, silica gel tube.
Water pumps and adapters:
Silica gel tube:
Fan and base:
Our fans are high-powered high-end fans, though not new.After careful cleaning, it can\`t be seen that it is a dismantling machine.The quality of the fan is much better than the ordinary brand fan.At rated power, the wind power is more than 5-10 times that of the radiator of the computer cabinet.The following is a picture of installing a circuit and a fan using a base kit. The original base material is ABS engineering plastics, and now it has been upgraded to a transparent acrylic board.
The weight of the heating circuit and the fan and base is more than half a kilogram, which is probably the heaviest among the similar products. Although the weight is ≠ performance, butWe stick to the high power fan and the thickened radiator, and use the fan to uniformly dissipate all the components on the circuit board, unlike some circuit boards that only blow the heat of the radiator, and the capacitance and inductance of these heating elements do not blow the wind, and the components can not be damaged by a few times.
Whole system connection method(open 20A is better. When heating crucible, 16A is easier to trip, 1P or 2P):
[cautions]
1.If the circuit is continuousWork must be done by adding a cooling fan from top to bottom, cooling the resonant capacitor, magnetic ring and other components..In particular, the capacitor has a high fever for a long time. It is very irresponsible for some shops to not heat the capacitor.
2.When using the switch power supply, please note that the power supply generally has a slow start function, that is, the output voltage is slowly rising after the start of the machine, and if the induction heating circuit is connected before the voltage rises to 10V, it will not start because the starting voltage is not enough and causes the two MOS tubes to be at the same time and burn up the components. thereforeA switch must be added between the power supply and the heating circuit. After 35 seconds, the voltage is stable and the switch is switched on to the induction heating circuit.
3.When heating iron bars or objects like iron pipes, ifUse 40mm diameter heating ring iron rodThe diameter should not exceed 10mm, otherwise the circuit will be damaged due to the excessive current. An ammeter can be added between the power supply and the heating drive plate to monitor the current.
[about heating rings]
The heating ring is made of 6mm diameter copper tube, with elegant appearance and excellent performance. In contrast, I know what is the spirit of the craftsman.
\\
\\
We can customize the heating ring, for example, the double coil below, which can quickly heat the fine carbon steel wire and burn it in one or two seconds. The 6-12mm copper tube can also be welded with solder. Heating stainless steel wire below 1mm diameter is very slow, the temperature is two or three Baidu appearance.
\\
\\
Demo video:http://v.youku.com/v_show/id_XMjIyMDU3MTU4OA==.html
[about pumps and power adapters]
The pump used in our shop is a gear pump, and the effect is good if the water pressure is large. If the buyer buys the fish bowl pump himself, it can only be small, but the effect is not good.
[about the crucible]
This is the contrast between our previous crucible and the current crucible.
The previous crucible was small in volume and less in capacity.The wall thickness of the alumina ceramic crucible is only 2 millimeters,The heat preservation effect is not good and is easy to crack when heated. to this endWe customize the thickened graphite crucible that is twice as large as the previous capacity and the quartz crucible that is the same as the high end induction heating furnace, and it is specially thickened, with good heat preservation effect and high heating temperature. A lot of shops, though Shanzhai\`s electric circuit, are still using the previous crucible.Specially added drawings, welcome you friends Shanzhai imitation!
The following is a picture of the super power molten iron in this circuit.
Note: under normal circumstances, the temperature of 48V power supply can only melt metals such as gold, silver and copper, which are not particularly high melting points, and can not melt iron and steel.
If you don\`t want to use my pump, you can buy a cheap fish tank pump and put it in a container filled with water.
This drive circuit can also drive high voltage package to output high voltage when high voltage power supply is used. (of course, this kit does not contain high voltage package, and can be purchased in our shop if necessary).\\
When the high-voltage package is connected, use more than 1 square wires on the high voltage magnetic core for 10 circles, and the two ends are connected to the copper column on both sides of the circuit. If a high-power high-voltage output is required, more than 4 high voltage packages can be driven by one circuit, and the input and output terminals of the high voltage package are connected in parallel.
Video address:http://v.youku.com/v_show/id_XMjUyMzg0MzIwNA==.html
\`