|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- DIY ¿ëÇ°: ¹è°ü
- ±Ù¿ø: CN (Á¤Ç°)
- Áõ¸í¼: NONE
¿É¼ÇÁ¤º¸[(175)green]
Best Noise Source Simple Spectrum External Generator Tracking SMA Source 0.001-3000Mhz
Test equipment: Agilent DSA815 spectrum analyzer (9KHz-1.5GHz); power supply: 12V1A The power interface, single-pin and non-pin, are shipped randomly, and the function is the same as that of the DC port, which does not affect the use. If you need any, you can leave a message for delivery.
Noise source Noise source Simple spectrum tracking source noise source Power supply: DC12V/0.3A-1A POWER:DC12V/0.3-1A Output interface: SMA OUTPUT CONNECT:SMA Reference ENR (Extra Noise Ratio): 0.1G/60DB 0.5G/55DB, 1G/52DB, 1.5G/48DB 2G/38DB 2.5G/30DB, 3G/27DB, 3.5G/20DB, reference ENR: 0.1G/60DB 0.5G/55DB, 1G/52DB, 1.5G/48DB 2G/38DB 2.5G/30DB, 3G/27DB, 3.5G/20DB, Q: What is this and what is it for? A: Noise source, generate noise, can be used as spectrum tracking source, interference source Q: What is the basic principle and how to use it? A: Using a special voltage regulator tube, white noise is generated in the breakdown state, and then amplified. Just replace the tracking source directly Q: What is ENR A: ENR, the full English name is Excess Noise Ratio, that is, the multiple of the noise source exceeding the standard noise temperature T0 thermal noise. Here we mean that the spectrum is not connected to the noise source and the signal strength is poor after the noise source is connected. Colour: green Material: plastic Size: 85x55x25mm
Package Contents: 1 * Noise Source
Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
|
|
|
|