220V 120W Ultrasonic Generator Cleaning Machine Power Driver Board Dishwasher / 40khz Transducer Vibrator Product Features The oscillator does not distinguish between positive and negative poles
Power board parameters: 120W 40khz
Using high-quality materials with guaranteed quality
Widely used
Stable performance
Product Introduction Instructions for wiring circuit board and shock head (ceramic transducer):
1. The circuit board shall not be powered on without load;
2. During cleaning, it is not allowed to power on without cleaning solution;
3. The two connecting lugs of the shock head are divided into positive and negative terminals, and should not be connected in reverse;
When welding the power cord with a vibrating head, it is necessary to weld it on one side with two silver layers, and the other side is the vibrating surface, which can be pasted under the cleaning basin (this is the instruction for components with ceramic plate transducers); The silver layer on the ceramic chip is not heat-resistant, and the temperature of the soldering iron when welding the power cord should not exceed 280 degrees. It is best to use a constant temperature soldering iron, and set the soldering iron temperature to 250 degrees;
5. The larger side of the vibration head (with a screw hole) is the vibration surface that can be adhered to the bottom of the cleaning container outside. If it is necessary to weld the screw with argon arc welding and add glue, tighten it to the bottom and tightly adhere to the steel plate;
6. There should be no gaps at the bottom of the adhesive;
7. The vibrator is suitable for the 10CM * 10CM range outside the metal box;
8. Normal continuous working time should not exceed 10 minutes
9. Power board parameters: 120W 40khz
10. Oscillator parameters: 40khz
11. Voltage: 220V
Shipping List Package 1: 1 * Power module
Package 2: 1 * vibrator