|
![](https://ae01.alicdn.com/kf/Sf5392757c1b847a7bddd57e63ac5d6ccF/C-USB-QC4-0-PD2-0-3-0.jpg) ![](https://ae01.alicdn.com/kf/S5dc69ce7488041a4bad67a441bc138fdG/C-USB-QC4-0-PD2-0-3-0.jpg) ![](https://ae01.alicdn.com/kf/S141db9c434d04146a39249dc535d910d1/C-USB-QC4-0-PD2-0-3-0.jpg) ![](https://ae01.alicdn.com/kf/Sc67c7d5c0b6c481e91d3292252d2f1d8q/C-USB-QC4-0-PD2-0-3-0.jpg) aHR0cDovL2ZyZWVzaGlwLmNvLmty![](https://ae01.alicdn.com/kf/Sf5392757c1b847a7bddd57e63ac5d6ccF/C-USB-QC4-0-PD2-0-3-0.jpg) ![](https://ae01.alicdn.com/kf/S5dc69ce7488041a4bad67a441bc138fdG/C-USB-QC4-0-PD2-0-3-0.jpg) ![](https://ae01.alicdn.com/kf/S141db9c434d04146a39249dc535d910d1/C-USB-QC4-0-PD2-0-3-0.jpg) ![](https://ae01.alicdn.com/kf/Sc67c7d5c0b6c481e91d3292252d2f1d8q/C-USB-QC4-0-PD2-0-3-0.jpg) ![](https://ae01.alicdn.com/kf/Se0d2645795b445ea85646a768f876642Q/C-USB-QC4-0-PD2-0-3-0.jpg)
- DIY ¿ëÇ°: ELECTRICAL
- ºê·£µå À̸§: Aideepen
- ¿ø»êÁö: Áß±¹
¿É¼ÇÁ¤º¸[(350686)DC5521] [(350850)DC5521] [(350852)With XT30] [(350853)With XT30]![](https://ae01.alicdn.com/kf/S371a113610794d5c95307c5ba2a846b0U/C-USB-QC4-0-PD2-0-3-0.jpg_640x640.jpg)
DC 9V-35V 65W Full Protocol Mobile Phone Fast Charging Module Type-C USB Charger Module Supports QC4.0 PD2.0/3.0/PPS
1. High-efficiency mini volume, high-power fast charging module 2. Small size, high power, 2 input port selection, default DC5521 input interface, optional XT30 input port 3.4 specifications are optional, fast charging module without XT30 interface, fast charging module with XT30 interface, with shell, without shell 4. Full protocol, good compatibility, low power ripple, sufficient materials 5.65W full protocol, support PD3.0/PPS/QC2.0/3.0/4.0AFC/FCP/SCP V00C1.0/2.0 DASH/WARP and other mainstream fast charging
Product design, materials, PCB process to make a lot of efforts, so that this module can achieve considerable parameters and functions in a small volume. The module volume is small, the heat dissipation area is limited, and the high-power output heating is a normal phenomenon, we use good materials, and there is no need to worry about heating affecting life. This product is suitable for fast charging of mainstream brands, and supports up to 65W. Support Huawei OPPO and other super fast charging, except for some models of the VIVO series can not be fast charged, each brand support is good, such as OPPO series (?plus, real me mobile phone) support high-power super fast charging, support Huawei super fast charging (need to use the original line). The charging power is much faster than older solutions such as the 3518. Supports Apple`s fast charging of all versions. Since the QC4.0 standard needs to use the Type-c port, Xiaomi and other mobile phones that support the QC4.0 protocol are recommended to use the Type-C port to charge to obtain higher charging power.
Input: DC 9V-35V 2 input ports: DC5521 input interface, XT30 input port Maximum output power: 65W Conversion efficiency: up to 93% Temperature: -40¤°C to +85C Charging port: Type-C + USB Output short-circuit protection High-current USB output interface Support BC1.2 charging protocol APPLE 5V/2.4A IS SUPPORTED Supports PD2.0/3.0/PPS Support QC2.0/3.0/4.0, etc Support FCP, SCP, HSCPV00C/DASH/WARP Support for SuperV00C2.0 Supports a variety of direct protocols SIZE: 44.9MM*25.8MM, BOARD THICKNESS 11.5MM, FOUR SCREW APERTURE 2.0MM
DC5521 interface input: input DC 9V-35V, internal positive and external negative. Designator +: Optional solder input positive pole, or XT30 interface positive pole. Designator-: Optional solder input negative pole, or XT30 interface negative pole.
Set 1: The 1X module does not have an XT30 interface Set 2: 1X module without XT30 interface + housing Set Three: 1X module with XT30 interface Set 4: 1X module with XT30 interface + housing
¡ß The product input should be greater than the output voltage, and it is best to maintain a voltage difference of more than 1V, such as to output 12V, it is recommended that the input be more than 13V, and the input cannot be reversed, and the reverse burning plate is connected. ¡ßIf welding is required, it is best to disconnect the power supply when wiring, and live welding will have a certain risk of hitting the chip and breaking down the chip. ¡ß The wiring should not be too thin to ensure that the wire can withstand the corresponding current. ¡ß Many fast charging requires the use of original wire, otherwise it will lead to not fast charging, or slow charging. ¡ßThe larger the power used by the module, the closer the current is to the maximum current. The greater the heat generation, pay attention to heat dissipation when using. ¡ß The actual charging power of the mobile phone is related to the mobile phone protocol, and the battery life of the mobile phone is related, subject to the actual situation, the module outputs the maximum voltage of 12V, the maximum current is 4A, the charging power and voltage are also very related, different protocols, charging voltage is not the same, this is decided by the mobile phone, the module is not right to decide, the module is passive in response to the mobile phone charging command. A small number of mobile phones do not open third-party fast charging, and third-party fast charging may be blocked after the mobile phone is upgraded. is normal. ¡ß If the mobile phone is a direct flush protocol, the mobile phone power is low when the start of high-power direct rush, when a certain amount of electricity, the current will decrease with the increase of electricity, is a normal phenomenon, this is not to say that the module to you to reduce the current, the module is unable to detect the power of the mobile phone, this is the mobile phone comes with charging management chip control, mainly to ensure safety and extend battery life. ¡ßWhen encountering problems in use, contact customer service must cooperate with customer service to provide wiring pictures, use videos, etc., and do not accept only text information.
|
|
|
|
|