Creality Spider 3.0 High Temperature High Flow Hotend Pro All Metal Hotend Upgrade for Ender 3/Ender 5/
CR-10 Series 3D Printers
Nozzles |
0.4mm*1, 0.8mm *1 |
Size |
66*22*23mm |
N.W. |
61g |
Color |
Red |
Compatible With Filament |
PLA, ABS, PETG, TPU, PP, PC, PA, PEI, etc |
Support Filament Diameter |
1.75 ± 0.05mm |
Retraction Distance |
Max 5mm (It can be adjusted according to the printing situation) |
Overall temper resistance |
450¡É ( excluding silicone sleeve) |
Nozzle, throat tube Ra |
Ra ¡Â 0.25
|
Key Features:
1.¡¼All Metal Design, Up to 300 ¡É Printing¡½With scientific structure and material selection, the Spider 3.0 Pro All Metal Hotend Upgrade Kit can reach 300¡É to accomplish better effect of printing with high temperature filaments. It is compatible with PLA, ABS, PETG, TPU, PP, PC, PEEK, PEI, Nylon and more filament.
2.¡¼Large Melting Zone, High-Flow Printing¡½The overall melting zone length is 27.3mm, increased by 30% compared with spider hotend v1.0 and other common hotends, which offer a smooth printing experience even with 0.8mm nozzle. Meanwhile, the inner wall of nozzle and heat block adopt fluid polishing process, Ra¡Â0.25, greatly enhance fluidity of filament and prevent clogs.
3.¡¼Supporting 300mm/s High-Speed Printing¡½The high-temp heat-resistant insulation sheet is added to maintain the temp of the melting zone, supporting 300mm/s high-speed printing.The titanium alloy screws were used to reduce the thermal conductivity by 30%, which can reduce the transfer of heat from the hating zone to the heat dissipation zone and ensure the smooth feeding. Meanwhile, red copper heat sink to improve heat dissipation efficiency.
4.¡¼Easy to Install, Wide Compatibility¡½Small and exquisite external size with modular standard interface design, easy to install. Directly compatible with Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max, no modification required. You can find the their high-temperature firmware on Creality website. For Ender 5/Ender 5 Pro/Ender5 Plus/Ender2 Pro/CR 10S/CR 10/CR10 S5/CR10 S4/CR 10Mini/CR 20 Pro, they require slight modification. PLEASE NOTE: NOT COMPATIABLE WITH ENDER 3 NEO/ENDER3 V2 NEO/ENDER3 MAX NEO.
5.¡¼Product List¡½This kit comes with a Spider hotend, a thermistor, a copper tube, a thermal grease, an adaptor, silicone sock, wrenches and screws.
Compatible Models :
Ender-3 Pro/Ender-3/Ender-3 V2/Ender-5/Ender-5 Pro/Ender-5 Plus Ender-3s/Ender-6/Ender-4/Ender-3 Max/Ender-2 Pro/Ender-2/CR-10S CR-10/CR-10 S5/CR-10 S4/CR-10Mini/CR-20/CR-20 Pro 3D Printers