Application:
Suitable for commercial and industrial use, it can cut canvas, synthetic fabric, cloth, rope and cord, lightweight foam, KT board pink foam, polyethylene, expanded polystyrene (EPS) and extruded polystyrene (XPS), styrofoam, polyester foam, sponge etc
electric fabric cutter does really well in cutting and sealing synthetic fabrics with fine edge. The shape blade of hot knife heats up fast and the cutter comes with variable heat setting, allowing it to work efficiently.
Light weight, convenient use and clean cutting: with sharp blade heating up in seconds, the hot knife is a most efficient hand-hold cutter for cutting synthetic fabrics. The hot cutter can cut and seal the material at the same time and the edge of the fabric is sealed smoothly.Power supply AC 230V/50Hz or 120V/60Hz
Specification:
Model:KS EAGLE
Voltage AC:230V/50Hz or 120V/60Hz
CONTINUOUS-USE:The air cooling system inside the hot knife enables
Temp of Blade up to 500¡É in seconds
Adjustable Knob:16 steps
Power Cord Length:3m
Product Weight:600g
Product Size:340*300*110mm
Fabric Cutter X 1
Blade X 1
Brush X 1
Plastic Box X 1
User Manual X 1
Cautions:
1. Avoid direct contact between the two blade holders to cause a short circuit.
2. Turn the temperature adjustment knob to the middle position, place the blade on the cutting object, and then press the trigger. The hot knife is preheated for a few seconds to cut. It is recommended to do the cutting test on the waste material first.
3. It is best to keep the temperature and speed in harmony when cutting.
4.Reduce the blade temperature or release the switch intermittently If there is too much smok