Packaging Details
- Unit Type:piece
- Package Weight:0.35kg (0.77lb.)
- Package Size:10cm x 5cm x 5cm (3.94in x 1.97in x 1.97in)
Product specifications: Temperature control range: 1 ° C
Scope of application: in addition to tin
Net weight: about. 40 grams
Length: approx. 200 mm / 7.87 inches
Material: semi-aluminum semi-plastic / all aluminum
Maximum suction: 30
Color: yellow, blue
Management manual:
1. Lower the tin pressure of the sugar nipple and get stuck.
2. Heat the solder joints and solder them with a soldering iron.
3. Remove the iron and quickly place the solder tin in the solder, press the button and press the button.
4. If it is not cleaned at one time, it can be repeated multiple times.
Use skills:
1. Provide a good welding suction cup with a piston seal. Before power, use a finger to weld the hole, press the button on the welding head, and if the piston is not easy to get into the place, the seal is good.
2. Different sizes of tin heads, choose the right specifications.
3. The tin cloth on the head is worn and must be replaced with a new one.
4. Immerse the solder paste in a small amount of rosin to improve solder smoothness before touching the solder.
5. The front contact pads are slightly longer when the solder fuses, the solder joint pins are centered, then extend our hand in a clockwise direction to draw a circle, then press the button tin bitch.
note:
Due to manual measurements, please allow a difference of 1-3 cm.
-->