|
![](https://ae01.alicdn.com/kf/HTB1PKoMKFzqK1RjSZSgq6ApAVXaV/0-01mm.jpg) ![](https://ae01.alicdn.com/kf/Hb9fab5cb48754bbeaf15bc110bc54f433/0-01mm.jpg) ![](https://ae01.alicdn.com/kf/HTB1IQZNKFzqK1RjSZFoq6zfcXXaq/0-01mm.jpg) ![](https://ae01.alicdn.com/kf/HTB100cIKHPpK1RjSZFFq6y5PpXaV/0-01mm.jpg) aHR0cDovL2ZyZWVzaGlwLmNvLmty![](https://ae01.alicdn.com/kf/HTB1PKoMKFzqK1RjSZSgq6ApAVXaV/0-01mm.jpg) ![](https://ae01.alicdn.com/kf/Hb9fab5cb48754bbeaf15bc110bc54f433/0-01mm.jpg) ![](https://ae01.alicdn.com/kf/HTB1IQZNKFzqK1RjSZFoq6zfcXXaq/0-01mm.jpg) ![](https://ae01.alicdn.com/kf/HTB100cIKHPpK1RjSZFFq6y5PpXaV/0-01mm.jpg) ![](https://ae01.alicdn.com/kf/H33fce6bb12284b10bf4ccd385b5ac15cf/0-01mm.jpg)
- ¸ðµ¨ ¹øÈ£: HK16
- DIY ¿ëÇ°: Metalworking
- ºê·£µå À̸§: HKFLYTOOL
- ±Ù¿ø: CN (Á¤Ç°)
- Range:: 0-10mm
- Resolution:: centesimal:0.01/0.0005\
- Operating temperature:: 0~40
- Range2:: 0-12.7mm
¿É¼ÇÁ¤º¸[(201739810)0-10mm flat] [(350686)0-10mm point] [(350850)0-10mm point CL] [(350852)0-10mm CL]![](https://ae01.alicdn.com/kf/H45f4c4d5d36a44d3a6d630d30a46378fl/0-01mm.jpg_640x640.jpg)
![](https://ae01.alicdn.com/kf/HTB18DGyKhnaK1RjSZFBq6AW7VXaS.jpg)
Function:
1.Zero-setting at any position.
2.Automatic switching function.
3.Mm/inch measurement system conversion
Usage Direction:
1.Wipe clean the upper and lower probe
2.Press the key , turn on the power , check the display is normal
3.Down according to the measure button closes the upper and lower measuring head, press zero reset, then, at this point can be measured
4.The workpiece to be measured in square measuring head and down according to the measurement button, make the measuring head compression on the workpiece, and reading
5.Press the mm/in to change the display.
Battery Installation:(not including battery before send)
The battery cover on the back of the product according to the inverse direction and get off, replace the old battery(¡°+¡±side up), then the battery cover
Attendtion:
1.Thickness Gauge are precision measuring tool, when using, should prevent bump, drop, so as to avoid the loss of accuracy.
2.Should be kept clean to avoid water and other liquid substances into the table so as not to affect the normal use damage
3.Any part of the measured voltage is applied to thick sheet can not , do not use a pen lettering avoid damage electronic circuit
4.The range on the picture is 0-12.7mm, but the range is actually 0-10mm, please refer to the range that has been received.
|
|
|
|
|