|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ½º¸¶Æ® ±â±â: no
- ¸ðµ¨ ¹øÈ£: YY-1000N
- ¹é¶óÀÌÆ® ¿É¼Ç: YES
- µð½ºÇ÷¹ÀÌ À¯Çü: DIGITAL
- ºê·£µå À̸§: yieryi
- ±Ù¿ø: CN (Á¤Ç°)
- FUNCTION 1: Measure Soil EC
- FUNCTION 2: Temperature test
- FUNCTION 3: Soil moisture
¿É¼ÇÁ¤º¸[(201739810)Backlight]
3 in 1 Digital Soil EC Moisture Temperature Meter Humidity Tester LED Display Remove Probes Test Analyzer for Planting Farm Tool
Feature:
1. Three-in-one function (soil conductivity/soil moisture/soil temperature)
2. LED display
3. High-precision probe, anti-rust and corrosion-resistant, detachable
4. Low battery warning
5. Scope of application: greenhouses, rice, vegetables, orchards, flowers, soil research, etc.
Specifications :
1£¬Model: YY-1000
2£¬Measuring range: EC: 0.01-20.00ms/cm
3£¬Humidity: 0.01%-99.9% (PDR technology)
4£¬Soil temperature: -30°C-80°C, -22°F-176°F
5£¬Ambient temperature: -30°C-80°C, 22°F-176°F
6£¬EC calibration: support two-point calibration: 1413us/cm, 12.88us/cm
7£¬Humidity calibration: it cannot be calibrated, it has been calibrated before leaving the factory.
8£¬Battery: 3*1.5V (button battery)
9£¬Product size: 210*45*35
10£¬Screen display: LED display
Application:
Scope of application: greenhouses, rice, vegetables, orchards, flowers, soil research, etc.
Precautions:
1. The probe must be in full contact with the soil during testing, and the probe must be fully inserted into the soil.
2. When using, pay attention to the probe to avoid stones, sand, hard soil, do not use too much force, otherwise it will easily damage the electrode. Wipe and clean the electrode in time after use.
3. The probe should be fully exposed to water during calibration, and the probe should not touch the bottom and sides of the container
4. After use, clean the electrode and store it dry.
Calibration£º
1. Put the electrode into the 1413us standard solution after starting up, shake it gently, and wait for the value to stabilize
2. Long press the CAL button, the screen flashes and the subtitle of ¡¼CAL¡½appears to enter the calibration mode.
3. The value close to the standard liquid phase will appear on the screen, press ¡å to decrease the value, press ¡ã to increase the value, and adjust the value to 1.41, the value flashes, the calibration is successful. The calibration method of 4.12.88ms standard solution is the same as that of 1413us.
Steps£º
1. Press the power button to turn on
2. Insert the electrode into the corresponding depth of the soil to be tested (the probe must be fully inserted into the soil)
3. Stand still and wait for the value to be read
4. After use, press the power button to shut down, clean the electrode to reduce pollution and save it.
Tips:
Operation page: every time you turn on the computer, the last operation interface is displayed
¡¼Hold/temp¡½key: short press, data is locked, H is displayed in the upper left corner of the screen, long press ¡É/¢µ temperature unit conversion
¡¼Mode/CAL¡½key: Short press, function conversion, long press to enter calibration
Low battery warning: When there is only one bar left on the battery mark in the upper right corner, a low battery alarm will be issued. Please replace the battery in time to ensure the normal use of the product.
Packing List :
1, 1 x Soil EC/Temperature Tester 2, 1 x electronic manual
FAQ
1. What is the soil EC value?
Soil EC value is an index for determining soil water-soluble salt, and it is a factor to determine whether salt ions in the soil restrict crop growth
2. What is soil temperature?
Soil temperature mainly refers to the temperature in the shallow layer of the ground directly related to the growth and development of flowers and trees.Soil temperature affects the growth and development of plants and the formation of soil.
3. Does this measuring instrument need batteries?
Yes, it needs 3*LR44 batteries, it is not included in the package, you can buy it locally
4. What should I do if I receive the goods but cannot use it normally?
Please refer to the instruction manual. If you have any questions, please contact customer service. If you encounter any non-artificial quality problems within one week after receiving the goods, you can contact us for replacement or refund.
|
|
|
|
|