Feature:
1. This CPU cooling fan supports both for Raspberry Pi 3 and the new for Raspberry Pi 4.
2. Can reduce the temperature of the for Raspberry Pi from 80¡ÆC to 40¡ÆC under overclocking.
3. 5mm brass tube, multi?layer , 7?blade powerful fan blades, faster heat dissipation.
4. An RGB cooling fan will efficiently dissipate the heat while decorating your computer.
5. Easy to install with small size and light weight, and 0.4W rated power will save the energy.
Specification:
Item Type: CPU Cooling Fan
Product Material: Plastic + Brass
Function: Heat Dissipation
Rated Power: 0.4W
Voltage: DC 5V
Current: 0.08A
Package List:
1 x CPU Cooling Fan
4 x Nut
6 x Screw
8 x Standoff
2 x Buckle
4 x Washer
1 x Plastic Plate
Note:
1. During the use of the cooling fan, please do not touch the blades and the power cord around the fan or pull the power cord, which will damage the shaft and the power cord;
2. When using the cooling fan, please avoid the entry of dust, water droplets and small insects, which will affect the service life and produce defective products;
3. Do not use the cooling fan in flammable gas or any harmful environment to prevent explosion or damage;
4. Please use the cooling fan within six months after purchasing. Long?term storage will affect the performance of the fan due to the storage environment;
5. When the cooling fan is in operation, please do not attempt to lock the fan for a long period of time. This will cause the fan to be burned out due to continuous stoppage and high heat generation;
6. When installing the cooling fan, please pay special attention to the noise caused by resonance or vibration;
7. During transportation or operation, if the cooling fan falls from a height of 60cm, it will have a certain impact on the balance of the blades, especially the ball bearings to avoid falling;
8. The screw torsion should not exceed 4Kgf when the shell of the cooling fan is locked; please do not use screwdrivers, iron rods, etc. to block the fan, as this will damage the fan;
9. Please be careful not to put your fingers in the cooling fan when it is running at high speed to prevent your fingers from being injured.