Features:
1. Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables.
2. Hub blink for locating network port by the flashing port light on Hub / Switch.
3. Check wiring error in 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection.
4. Locate the wiring or connection error.
5. Measure cable length up to 1000m and locate the breakage point.
6. polarity test function measure DC voltage (0.5-60 V)
7. Memory and storage for calibration data.
8. Automatically time-delay shut off and Low battery alarm function.
Technical indexes:
£¨1£©NF-308 Transmitter specifications
Indictor£ºLCD 53x25 mm, with back light
Tone frequency£º225 Hz
Max. distance of transmission£º2 km
Max. distance of cable map£º1 km
Max. working current£ºLess than 70mA
Tone mode£º2 Tone adjustable
Compatible connectors£ºRJ11£¬RJ45,Coacial, USB
Max. signal voltage£º15Vp-p
Function selection£º3 position buttons & 1 power switch
Function and faults LCD display£ºLCD display ( wiremap, Tone, short, , No adapter, Low battery )
Cable map indication£ºLCD (#1-#8)
Shielded indication£ºLCD ( #9)
Voltage protection£ºAC 60V/DC 42V
Battery Type£ºDC9.0V£¨NEDA 1604/6F22 DC9V x 1pcs£©
Dimension(LxWxD)£º185x80x32mm
£¨2£©NF-308 Receiver specifications
Frequency£º225kHz
The Max. working current£ºLess than 70mA
Battery Type£º DC9.0V£¨NEDA 1604/6F22 DC9V) x1pc
Dimension(LxWxD)£º218x46x29 mm
£¨3£©NF-308 Remote unit specifications
Compatible connectors£º RJ45, BNC
Dimension(LxWxD)£º107x30x24mm
Attention:
1.Don`t connected high voltage lines to avoid buring out the machine.
2.Put into the right place to avoid hurting others,because of the sharp part.
3.Connected the cable to the right port.
4.Read the user manual before use it.
Package Include:1X NF-308 wire tracker (battery is not include)