|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ÃÖ´ë ÆÄÇü ĸó ¼Óµµ: 50, 000wfm/s
- ±â·Ï ±æÀÌ: 30KB
- ¸ðµ¨ ¹øÈ£: FNIRSI-1014D
- ½Ç½Ã°£ »ùÇøµ ¼Óµµ: 1GSa/S
- µð½ºÇ÷¹ÀÌ ÇØ»óµµ: 800*480Çȼ¿
- µð½ºÇ÷¹ÀÌ Å©±â: 7 ÀÎÄ¡ ¹× À§ÀÇ
- ¹êµå ³Êºñ: 100-349mhz
- µðÁöÅРä³Î: 2
- DIY ¿ëÇ°: ELECTRICAL
- ºê·£µå À̸§: FNIRSI
- ±Ù¿ø: CN (Á¤Ç°)
- Trigger edge: Rising edge/Falling edge
- Extension ports: USB picture export
- Trigger mode: Single, Normal, Auto
- Coupling mode: AC/DC
- ADC precision: 8bits
- Input resistance: 1M
- Storage depth: 240Kbit
- Maximum test voltage: 40 V (1X probe), 400 V (10X probe)
- Horizontal time base range: 50S/div ~ 10nS/div
- Vertical sensitivity: 50 mV/div ~ 500 V/div
¿É¼ÇÁ¤º¸[(201530806)1014D]
FNIRSI-1014D:
FNIRSI-1014D is a two in one oscilloscope and signal generator launched by FNIRSI. It has comprehensive functions and high practicability. It is a cost-effective dual channel desktop oscilloscope for the maintenance industry and R & D industry. The oscilloscope has a real-time sampling rate of 1GSa / s and 100MHz* 2 analog bandwidth; complete trigger function (single time / normal / automatic), both for periodic analog signal and aperiodic digital signal can be used freely; built in DDS function signal generator and the industry`s original chopping output (@ 2.5vpp), all signal frequency step is 1Hz, support 14 kinds of standard function signal and a customizable chopping signal, chopping The output device intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal generator, which can store up to 1000 customized cut-off signals; the built-in high-voltage protection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope burning accident caused by the probe not moving to 10x gear. Large time base scrolling mode, which can monitor slow level changes; equipped with efficient one button auto, which can display the measured waveform without tedious adjustment; display high-definition LCD with 7-inch 800 * 480 resolution; cursor measurement function, when manually reading amplitude and frequency parameters, it does not need to read the background scale unit and quantity, and it does not need to convert to directly get peak to peak and frequency Extremely convenient screen capture and waveform storage function, built-in 1GB storage space, can store up to 1000 screen capture pictures + 1000 groups of waveform data, the storage process is simple and fast, save the current waveform with only one click, no cumbersome prompts and choices to save the current data, very convenient; powerful waveform image manager, support thumbnail browsing, view, view details The functions of page turning, deleting and waveform enlarging, reducing and moving are convenient for secondary analysis. The fuselage is equipped with USB interface, which can be connected with the computer to realize the sharing of its own screen capture pictures and the computer, which is convenient for secondary analysis; Li Shayu`s graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals; FFT viewing function can estimate the harmonic component of signals; Li Shayu`s graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals;
Key features :
1.Built in DDS signal generator, support 12 kinds of function signal
2.Industry`s original ¡¼Capture output signal¡½ function£¬can store up to 1000 capture signals
3.Targeted high intelligent decoding algorithm, the encoder life is infinite
4.Intelligent anti-burn£¬1X Can withstand up to 400V withstand voltage
5.100MHz analog bandwidth @ 1GSa/s sampling rate£¨1X = 5MHz£¬10X = 100MHz£©
6.Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast
7.High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V£¬100X can measure 0 ~ 4000V
8.Up to 12 parameters measurement£ºVPP£¬VP£¬Vmax£¬Vmin£¬Vavg£¬Vrms£¬Frequent£¬Duty+£¬Duty-£¬Time+£¬Time-£¬Period
9.Cursor measurement function, it is convenient to manually measure the period and frequency and voltage
10.Complete triggering function (single, normal, automatic)
11.At any time, the waveform display (pause function) is frozen
12.Equipped with high efficiency One-button AUTO
13.One-button waveform storage and screenshot
14.Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data
15.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
16.Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis
17.Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals
18.FFT display function, can analyze the spectral characteristics of the signal
19.Memory compression technology, waveform refresh screen does not flicker
20.Screen brightness adjustment
21.Background grid brightness adjustment
22.Ultra thin, easy to carry
Specifications:
1.Material: ABS
2.Ana-log band width: 100MHz * 2
3.Number of channels: 2 channels
4.Maximum real time sampling rate: 1GSa/s
5.Vertical sensitivity: 50 mV/div ~ 500 V/div
6.Horizontal time base range: 50S/div ~ 10nS/div
7.Maximum test voltage: 40 V (1X probe), 400 V (10X probe)
8.Storage depth: 240Kbit
9.Input resistance: 1M¥Ø
10.ADC precision: 8bits
11.Coupling mode: AC/Direct Current
12.Trigger mode: Single, Normal, Auto
13.Trigger edge: Rising edge/Falling edge
14.External trigger voltage 0~40 V
15.Extension ports: USB picture export
16.Package size: 340 * 140 * 70mm / 13.4 * 5.5 * 2.8in
17.Package weight: 1949g / 4.3lb
FNIRSI DSO-TC2:
FNIRSI-TC2 Product Manual:
Introduction£º
FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.
FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Press the [Up] and [Down] keys of the direction keys to select,Select ¡°Mos Test¡± item, press¡¼OK¡½key to enter component tester mode;Select the ¡°Oscilloscope¡± item, press¡¼OK¡½key to enter the oscilloscope mode.
"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.
FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components."Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yourself and complete the upgrade.
It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.
This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one. Equipped with large-size color dot matrix TFT display. Built-in rechargeable lithium battery. Bring more practical functions to users with a small size. If you are interested in this product, come and have a try, it will not let you down.
Features: 2 In 1 Function: This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one. This product is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components. The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth. With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analogs signals and aperiodic digital signals. Up to ±400V voltage signal can be measured, has a wide applications. Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment. Self-contained 80kHz /5.0V PWM waves test signal source with adjustable duty cycle. This instrument can automatically identify and measure various transistors. Including NPN transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and passive component such as resistors, inductors, capacitors, etc Automatic detection of pin definitions.
Specifications: Material: ABS Type: without adapter, with adapter (optional) Display: 2.4inch color screen with backlight Battery: 1 * lithium battery, 1500mAh (included) Recharging: USB Type-C, 5V Package size: 140 * 125 * 55mm / 5.5 * 4.9 * 2.2in Package weight: Without adapter: 296.6g / 10.5ounce With adapter: 345.6g / 12.2ounce
Oscilloscope Specifications: Real-tim sample rate: 2.5MS/s Anolog bandwidth: 0-200kHz Input resistance: 1M¥Ø Coupling: AC/Direct current Test voltage ranges: 1:1 probe: 80Vpp (±40V) 10:1 probe: 800Vpp (±400V) Vertical sensitivity: 10mV/Div~10V/Div(in 1-2-5 increments) Vertical displacement: adjustable, with indication Horizontal time base ranges: 10us/Div~500s/Div (in 1-2-5 increments) Trigger mode: automatic, regular, single Tigger type: rising edge. falling edge Trigger level: adjustable, with indication Waveform freeze: yes (HOLD function) Automatic measurement: maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cycle PWM output: FRQ: 0~80KHz, duty cycle: 0~100%, amplitude: 5.0V
Electronic Component Tester Specifications: Capacitance measuring ranges: 25pF~100mF(capacitance value, loss factor Vloss) Resistance measuring ranges: 0.01¥Ø~50M¥Ø Inductance measuring ranges: 10uH~1000uH Battery measuring ranges: 0.1~4.5V Input voltage: 0~16V PWM output: 1.5KHz~9.99MHz
Without Adapter Packing list: 1 * Tester 1 * Type-C Cable 3 * Test Hook 1 * Probe
With Adapter Packing list: 1 * Tester 1 * Adapter 1 * P6100 High Voltage Probe 1 * Type-C Cable 3 * Test Hook 1 * Probe
|
|
|
|
|