|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¹èÅ͸® ÂøÅ»½Ä: ¾øÀ½
- ÃÖ´ë ÆÄÇü ĸó ¼Óµµ: 30, 000wfm/s
- ±â·Ï ±æÀÌ: 4M/8M
- ¸ðµ¨ ¹øÈ£: DSO2C10 DSO2C15 2D10 2D15
- ½Ç½Ã°£ »ùÇøµ ¼Óµµ: 1GSa/S
- µð½ºÇ÷¹ÀÌ ÇØ»óµµ: 800*480Çȼ¿
- µð½ºÇ÷¹ÀÌ Å©±â: 7 ÀÎÄ¡ ¹× À§ÀÇ
- ¹êµå ³Êºñ: 100-349mhz
- µðÁöÅРä³Î: 2
- DIY ¿ëÇ°: Àü±â
- ºê·£µå À̸§: Hantek
- ±Ù¿ø: CN (Á¤Ç°)
- Type 1: 2C10 2C15 2D10 2D15
- Type 2: hantek oscilloscope
Feature:
1) 2 channels, both are respectively controlled by independent knobes;
2)100 MHZ, 150MHZanalog channel bandwidth;
3)1 GSa/s real-time sample rate;
4) 8Mmemory depth;
5) Vertical range2mV/div ~ 10V/div;
6) Built-in 1 CH5MHz waveform generator;
7) Vertical resolution :8bit;
8) Trigger:Edge,Pulse width,Video,Slope,Overtime,Window,Pattern,Interval,Delay,UART,LIN,CAN,SPI,IIC;
9) CAN decode and protocol analysis:RS232/UART,I2C,SPI,CAN,LIN
10) Can save as multiple data formats, such as setting, waveform, referance waveform, CSV, picture;
11)5 bits digital voltage meter and 6 bits hardware frequency indicator function;
12) 32 kinds of auto measurements with statistics, real-time statistics of maxmum, minimum, standrad deviation and etc.;
13) 2 sets of digital voltmeter;
14) Support threshold testing, free measurements within the screen;
15) Abundant SCPIremote command control;
16) Many external interface:USB Host/Device.
Model
1CH 25MHz waveform generator, support arbitrary waveform burst output, support modulation waveform output
32 kinds of auto measurements with statistics
Can save 10 sets of referance waveform, CSV waveform and setting. USB one-click screenshot
2 sets of DVM,5 bits digital voltage meter and 6 bits hardware frequency indicator function
Serial bus trigger and decode, with protocol monitoring function
8M memory depth, reduce waveform distortion and restore real waveform
PASS/FAIL
Mathematical operation and FFT
X-Y format and display in dual windows
Parameters
Model |
DSO2D15 |
DSO2D10 |
DSO2C15 |
DSO2C10 |
Bandwidth |
150MHz |
100MHz |
150MHz |
100MHz |
Oscilloscope channels |
2CH |
2CH |
2CH |
2CH |
Waveform generator |
1CH |
1CH |
- |
- |
Oscilloscope |
Sample rate |
1GSa/s (single channel) 500MSa/s (two channels) |
Acquisition |
Sampling |
Sample data |
Peak-to-peak value |
Display high frequency and random burr |
Average |
Average waveform, times: 4, 8, 16, 32, 64, 128 |
High resolution |
Up to 12bit |
Input |
Input coupling |
DC, AC, GND |
Input impedance |
1M¥Ø±2% ?20pF±3pF |
Probe attenuation factor |
1X, 10X, 100X, 1000X |
Voltage classes |
300V CAT II |
Maximum input voltage |
300VRMS (10X) |
Horizontal |
Waveform interpolation |
(sin x)/x |
Maximum record length |
Single channel maximum8M |
Twochannelsmaximum4M |
Horizontal scale range |
2ns/div~100s/div 1, 2, 5 step by step |
Time base mode |
Y-T, X-Y, Roll |
Zero offset |
±0.5 div×minimum time base gear |
Sample Rate andDelay Time Accuracy |
±25ppm |
Clock drifting |
¡Â±5 ppm/year |
Delta Time MeasurementAccuracy |
single, ``acquisition`` mode |
(Full Bandwidth) |
±(1 sample interval+100ppm×reading+0.6ns) |
£¾16 times averages |
±(1 sample interval+100ppm×reading+0.4ns) |
Sample interval=sec/div÷200 |
Sample Rate andDelay Time Accuracy |
±50ppm(at any interval greater than 1ms) |
Vertical |
Model |
DSO2D15 |
DSO2D10 |
DSO2C15 |
DSO2C10 |
Bandwidth |
150MHz |
100MHz |
150MHz |
100MHz |
Rising time in BNC position (typical) |
2.3ns |
3.5ns |
2.3ns |
3.5ns |
Vertical resolution |
8 bits resolution, each channel samples simultaneously |
Vertical sensitivity |
2mV/div to 10V/div |
Offset range |
2mV/div to 20mV/div, ±100mV; 50mV/div to 200mV/div, ±1V; |
500mV/div to 2V/div, ±10V; 5V/div to 10V/div, ±50V |
Mathematical operation |
+, -, ×, ÷, FFT |
FFT |
?Ï¢:Ï»û¡,??,úÙ¥,øÖÕÃкغ,÷é÷å××÷å,øÁ?? |
Bandwidth Limit |
20MHz |
Bass response(-3db) |
In BNC position¡Â 10Hz |
Vertical gain accuracy |
In ``normal`` or ``average`` acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%; |
In ``normal`` or ``average`` acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4% |
DC offset accuracy |
±0.1 div±2 mV±1%offset value |
Voltage measurement repeatability, averageacquisition mode |
Under the same setting and environment, ¡Ã16 waveforms are sampled,¡âV of any two averages: ±(3%×value+ 0.05 div) |
Note: Bandwidth reduced to 6MHz when using a 1X probe |
Trigger |
Trigger type |
Edge,Pulse width,Video,Slope,Overtime,Window,Pattern,Interval,Delay,UART,LIN,CAN,SPI,IIC |
Trigger level range |
±5 divisions from the center of the screen |
Trigger mode |
Auto,general,single |
Level |
CH1~CH2 |
±4 divisions from the center of the screen |
EXT |
0~3.3V |
Holdoff range |
8ns~10s |
Trigger level accuracy |
CH1~CH2 |
0.2 div×volts/div within ±4 divisions from the center of the screen |
EXT |
±(Set value×6%+40mV) |
Edge trigger |
Slope |
Rising edge,falling edge,rising or falling edge |
Signal source |
CH1,CH2,EXT |
Pulse width trigger |
Polarity |
Positive polarity, negative polarity |
Condition(When) |
<, >, !=, = |
Signal source |
CH1~CH2, |
Pulse width range |
8ns ~ 10s |
Accuracy |
8ns |
Video trigger |
Signal standard |
NTSC, PAL |
Signal source |
CH1~CH2 |
Synchronization |
Scanning line, line number, odd field, even field, all field |
Slope trigger |
Slope |
rise, fall |
Condition(When) |
<, >, !=, = |
Signal source |
CH1 ~ CH2 |
Time range |
8ns ~ 10s |
Accuracy |
8ns |
Overtime trigger |
Signal source |
CH1~CH2, |
Polarity |
Positive polarity, negative polarity |
Time range |
8ns ~ 10s |
Accuracy |
8ns |
Window trigger |
Signal source |
CH1~CH2 |
Pattern trigger |
Pattern |
0: low level; 1: high level; X: ignore |
Level(signal source) |
CH1~CH2 |
Interval trigger |
Slope |
rise, fall |
Condition(When) |
<, >, !=, = |
Signal source |
CH1~CH2 |
Time range |
8ns ~ 10s |
Accuracy |
8ns |
Delay trigger |
Polarity |
Positive polarity, negative polarity |
Condition(When) |
<, >, !=, = |
Signal source |
CH1~CH2 |
Time range |
8ns ~ 10s |
Accuracy |
8ns |
UART trigger |
Condition(When) |
start, stop, data, odd-even check, reception error |
Signal source(RX/TX) |
CH1~CH2 |
Data format |
Hex (hexadecimal) |
Data length |
1 byte |
Data bit width |
5 bit, 6 bit, 7 bit, 8 bit |
Odd-even check |
none, odd, even |
Free level |
high, low |
Baud rate (optional) |
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s |
Baud rate(user-defined) |
300bit/s~334000bit/s |
LIN trigger |
Condition(When) |
Interval field, synchronization field, ID field, synchronization error, identifier, ID and data |
Signal source |
CH1~CH2 |
Data format |
Hex (hexadecimal) |
Baud rate (optional) |
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s |
Baud rate(user-defined) |
300bit/s~334000bit/s |
CAN trigger |
Condition(When) |
Start bit, remote frame ID, data frame ID, frame ID, remote frame data, data frame data, wrong frame, all errors, answer error, overload frame |
Signal source |
CH1~CH2 |
Data format |
Hex (hexadecimal) |
Baud rate (optional) |
10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000 |
Baud rate(user-defined) |
5kbit/s~1Mbit/s |
SPI trigger |
Signal source |
CH1~CH2 |
Data format |
Hex(hexadecimal) |
Data bit width |
4, 8, 16, 24, 32 |
IIC trigger |
Signal source(SDA/SCL) |
CH1~CH2 |
Data format |
Hex(hexadecimal) |
Data index |
0~7 |
Opportunity(condition) |
Start bit, stop bit, no response, address, data, restart |
Measurement |
Cursor |
Voltage difference between cursors¡âV |
Time difference between cursors¡âT |
Reciprocal of¡âT,in Hertz (1/¡âT) |
Auto measurement |
frequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time, + width, - width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF |
|
DVM |
Data source |
CH1, CH2 |
Measurement type |
DC effective value |
AC effective value |
DC |
Frequency meter |
hardware 6 bits frequency meter |
Arbitrary waveform generator |
Channel |
1 |
Sample rate |
200MSa/s |
Vertical resolution |
12 bits |
Maximum frequency |
25 MHz |
Standard waveforms |
sin,square, pulse, triangular, sampling wave, index, noise |
Arbitrary waveform |
Arb1, Arb2, Arb3, Arb4 |
Sin |
Frequency range |
0.1Hz~25MHz |
Square/pulse |
Frequency range |
0.1Hz~10MHz |
Triangular wave |
Frequency range |
0.1Hz~1MHz |
Sampling wave |
Frequency range |
0.1Hz~1MHz |
Index |
Frequency range |
0.1Hz~5MHz |
Noise |
|
Arb1 |
Frequency range |
0.1 Hz to 10 MHz |
Arb2 |
Frequency range |
0.1 Hz to 10 MHz |
Arb3 |
Frequency range |
0.1 Hz to 10 MHz |
Arb4 |
Frequency range |
0.1 Hz to 10 MHz |
Waveform length |
8KSa |
Frequency |
Accuracy |
100 ppm (<10 kHz) 50 ppm (>10 kHz) |
Resolution |
0.1 Hz or 4 bits,take the greater one |
Amplitude |
Output range |
10mV~7Vp-p (high impedance) |
5mV~3.5Vp-p (50¥Ø) |
DC offset |
Range |
±3.5 V,high impedance |
±1.75 V, 50 ¥Ø |
Resolution |
100 ¥ìV or 3 bits,take the greater one |
Accuracy |
2% (1 kHz) |
Output impedance |
50 ¥Ø |
General specifications |
Display |
Display type |
7``diagonalTFTliquid crystal |
Display resolution |
800 (horizontal)*480 (vertical)pixels |
Display colour |
16 million colours (24 bits true colour) |
Persistence time |
minimum,1 s, 5 s, 10 s, 30S,infinite |
Display type |
dot, vector |
Display brightness |
adjustable |
Grid type |
adjustable |
Grid brightness |
adjustable |
Interface |
Standard interface |
USB Host,USB Device |
General specifications |
Probe compensator output |
Output voltage, typical |
about 2Vpp input ¡Ã1M¥Ø load |
Frequency, typical |
1kHz |
Power supply |
100-120VACRMS(±10%), 45Hzto 440Hz, CAT¥± |
120-240VACRMS(±10%), 45Hz to 66Hz, CAT¥± |
Power consumption |
<30W |
Fuse |
T, 3.15A, 250V, 5x20mm |
Operating temperature |
0~50 °C (32~122 °F) |
Storage temperature |
-40~+71 °C (-40~159.8 °F) |
Humidity |
¡Â+104¢µ(¡Â+40°C): ¡Â90%relative humidity |
106¢µ~122¢µ (+41°C ~50°C): ¡Â60%relative humidity |
Altitude |
Operating and nonoperating |
3, 000m (10, 000 feet) |
Mechanical shock |
Random vibration |
0.31 gRMSfrom 50Hz to 500Hz, |
10 minutes on each axis |
Nonoperating |
2.46gRMSfrom 5Hz to 500Hz, |
10 minutes on each axis |
Operating |
50g, 11ms,half-sine wave |
Mechanical |
Size |
318 x 140 x 150mm (length x width x height) |
Weight |
2900g |
Accessories
|
|
|
|
|