¼³¸í
We defined this product as economic version of B210, or update version of B200. It with all of the function of B200,BUT support 2 channel RX and 2 channel TX. The FPGA firmware provided by us can support dual channels of receiving and transmitting, completely replacing B210, and fully compatible with the original B210 applications. However, due to the small number of FGPA IO ports, the GPIO port of the panel is unavailable. There are two GPIO ports available on the board.
Specifications
With aluminum case
Size: 150mm * 100mm
Supported frequency: 70Mhz-6Ghz;
TX port: two
RX port: two
USB 3.0 interface
For DC interface (6v), if GPSDO is not used and only single channel transceiver is used, external power supply is not required; if GPSDO is used or dual channel transceiver is used, external power supply is required.
Spartan 6 XC6SLX75 FPGA;
AD9361 dual channel RF transceiver chip supports a maximum sampling rate of 61.44Mhz/s
The clock precision on the board is 2PPM, which supports GPSDO or external reference clock, and the maximum precision can reach 1PPB (0.001 PPM).
Support UHD, GNURADIO, OPENBTS, OPENBTS-UMTS, SRSLTE, openairinterface, gps sdr sim, matlab, labview, gqrx, gr iridium, HDSDR, etc.
Frequency index:
Use the following test commands to test the output power of each frequency:
Test command:
sudo./tx_ waveforms --rate 0.5e6 --freq 470e6 --gain 90 --ampl 0.9 --wave-type SINE --wave-freq 0.1e6