|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: ANENG
- Áõ¸í¼: NONE
- ±Ù¿ø: CN (Á¤Ç°)
- ¹é¶óÀÌÆ® ¿É¼Ç: YES
- ¸ðµ¨ ¹øÈ£: Thickness
- Measurement range: 0 ~ 1500um (0 ~ 59.0 mil).
- Measurement accuracy: ¡¾ (3% H + 1 um) {¡¾ (3% H + 0.04 mil)}
- Measurement method: single measurement / continuous measurement
- Statistical function: maximum / minimum / average / variance
- Calibration points: linear smoothing calculation of 4 calibration points.
- Data group storage: 6 groups x 100 in each group.
- Minimum concave radius of curvature: 50mm/2in (1970mil)
- Minimum measured area diameter: 20mm/0.79in (787mil)
- Minimum substrate thickness: 0.5mm/0.02in (19.7mil)
ANENG 0-1500um Car Coating Thickness Gauge Meter Automobile Paint LCD Electroplating Metal Coating Thickness Measure Tool
ANENG Digital Car Coating Thickness Gauge Meter Automobile Paint LCD Measurement Tester Handheld 0-59.0mil Backlight Test Tool
Feature:
The coating thickness gauge integrates the functions of magnetic thickness gauge and eddy current thickness gauge, and can be used to measure the thickness of coatings on iron and non-ferrous metal substrates. The dual function built-in probe is used to automatically identify iron-based or non-iron-based materials, and select the corresponding measurement method for accurate measurement.
This instrument can measure the thickness of surface coating of magnetic metal (iron-based) and non-magnetic metal (non-iron-based).
High measurement accuracy and wide measurement range of 0 ~ 1500um (0 ~ 59.0 mil).
128X64 dot matrix black background white character COG LCD display shows that the data can be clearly seen when the backlight is turned off during the day, which saves more power. In addition, the backlight can adjust the brightness.
With gravity sensing function, it can automatically rotate the content of the display screen to keep consistent with the gravity direction, which is convenient to read the measurement data.
With 6 groups of data storage function, it is convenient to count and compare the data and deviation of different parts.
With 4-point smooth calibration function, the measured data is more accurate.
With upper and lower limit setting and prompt function, the red and green LED lights can flash and the display screen can prompt the out of limit state.
It is suitable for coating, metal processing, sales measurement, automobile paint inspection, second-hand automobile, accident vehicle evaluation and other industries.
Specification:
Iron base type: magnetic metal iron base (FE) / non-magnetic metal non iron base (NFE) / automatic identification.
Measurement range: 0 ~ 1500um (0 ~ 59.0 mil).
Measurement accuracy: ¡¾ (3% H + 1 um) {¡¾ (3% H + 0.04 mil)}
Measurement method: single measurement / continuous measurement
Statistical function: maximum / minimum / average / variance
Calibration points: linear smoothing calculation of 4 calibration points.
Data group storage: 6 groups x 100 in each group.
Minimum radius of curvature of convex surface: 5mm/0.2in (197mil)
Minimum concave radius of curvature: 50mm/2in (1970mil)
Minimum measured area diameter: 20mm/0.79in (787mil)
Minimum substrate thickness: 0.5mm/0.02in (19.7mil)
Display rotation angle: 0 ¡Æ, 90 ¡Æ, 180 ¡Æ, 270 ¡Æ / off
Unit conversion: Um / mil.
Upper and lower limit range: 0 ~ 1500um (0 ~ 59.0 mil) free setting / closing.
Backlight brightness: 10 levels adjustable / off.
Power supply battery: 2 AAA batteries (not included)
Duration of power exchange: 40 hours
Low power prompt: lower than 2.4V.
Automatic shutdown: automatic shutdown without any operation within 3 minutes.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 x Coating Thickness Gauge Meter
1 x USB Flash Disk(1GB)
1 x Iron Sheet Test Substrate
1 x Aluminum Sheet Test Matrix
1 x Calibration Test Sheet
1 x USB Data Cable
1 x Storage Bag
1 x Lanyard
1 x Packing Box
1 x Manual
[relateproductdetail/]
|
|
|
|
|
|
|
|