1. Wide power supply voltage: 11-15V power supply, if the heat dissipation is good, the maximum power supply can be 18v to ensure the consistency of performance
2. Working frequency bandwidth: Under the guarantee of radio frequency performance, the working frequency band is 20-1500MHz, which is suitable for most applications
3. Performance consistency: The amplifier has high gain consistency (28dB) within the frequency band (20-1500MHz).
4. High linearity: the output power is 26.5dBm (0.5W), which has a high dynamic range.
5. Low noise figure: The amplifier has a noise figure of 3.5dB under specified working conditions
1. Power supply voltage: 11-15V (the board contains two voltage regulator chips)
2. Frequency range: 20-1500MHz
3. Amplification gain: 28dB (in-band)
4. Noise figure: 3.5dB
5. Maximum power: 0.5W (26.5dBm)
6. Connector model: SMA female (outer screw and inner hole)
7. Dimensions: 50 x 50mm (40 x 40mm positioning hole spacing)
8. Product weight: 12.5g
3. How to use
1. RFin: Input the signal to be amplified
2. RFout: amplifier output signal
3. GND: negative pole of power supply (default ground)
4. VCC: Positive power supply (11-15V)
Color: green
Material: ABS
Package Contents:1 x RF Amplifier Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.