(2PCS) 85g Stars CPU Thermal Conductive Silicon Grease Paste Glue LED Light Silicon Rubber
Product introduction:
Thermal conductive adhesive (white paste body);
Coefficient of thermal conductivity > 0.671 W/m.k;
Breaking strength 1.5 MPA
The surface curing time 10 min / 25
Scope of application:
With high strength,
Speed glue effect,
Applicable to strong direct binding of various components, leds and radiator, etc.)
Packing specification:
85 g/a,
Vacuum bag packaging good air tightness, coat isolation air, increase to save time.
Product performance:
For thermal conductivity and insulation good one-component RTV silicone, the product has good conductivity, the use of a wider temperature range (60 ~ 200°c ), the short term can be 300°c high temperature resistant. In addition also has the surface curing time is short, a strong cohesive force, long storage life, non-toxic, no solvent, safe application in electronics, electrical appliances, instruments, LED, heat sink, etc of the elastic adhesive, heat dissipation, insulation, and encapsulation.
Method of use:
1, when using this product directly to squeeze out, wipe with glued surfaces, good immediately after, to try again;
2, fixed speed and relative humidity in the air and surface temperature; The higher the temperature, the faster the curing speed, conversely the more slowly;
3, recommended daub thickness: 0.1 0.5 mm, the thinner the better
4, by bonding surfaces before use, please clean solvent such as alcohol, avoid by all means use detergent to clean, can daub after surface clean.