|
aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics - Brand Name:
- Leadshine
- Motor Type:
- Stepper Motor
- Model Number:
- DM556
- Control Mode:
- Step & Direction
- Max Input Frequency:
- 200Khz
- Input Voltage Range:
- 20 - 50 VDC
- Output Current:
- 0.50 - 5.60 A
- Logic Current Range:
- 7-16mA (10mA typical)
- Logic Voltage Range:
- 4-5 VDC for pulse active high (default)
- Communication Type:
- RS232
- Step Width:
- 2,500 ns
- Isolation Resistance:
- 500M Ohm
- Protection:
- Over-current, over-voltage, and stall
Packaging Details - Unit Type:
- lot (3 pieces/lot)
- Package Weight:
- 1.230kg (2.71lb.)
- Package Size:
- 15cm x 15cm x 15cm (5.91in x 5.91in x 5.91in)
p> Notice: We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier. DM556 2-Phase 32-Bit DSP Digital Stepper Drive (3 pcs per lot ) The DM556 stepper drive adopts advanced features like electrical damping, anti-resonance, start-up smoothing, multi-stepping... With the input voltage of 20 - 50 VDC and output current of 0.50 - 5.60 A, it is capable of driving a wide range of 2-phase stepper motors with high precision at extra smoothness, quietness, and very low motor heating. Its multi-Stepping feature allows a low resolution step input to produce a much higher microstep output for smoother & quiet motor movement, and much lower motor heating. This feature will significantly improve the performance of your stepper control systems. A DM556 stepper drive is easy to setup and configure via DIP switches. There are 15 resolution settings from 400 - 25600, and 7 output current settings from 0.50 - 5.60. Also, a user can simply set the idle current to full (100%) or 50% of the output current via a DIP switch. Features: Step & direction or CW/CCW control DSP-based stepper control technology Anti resonance Automatic motor identification and self configuration Extra low noise Extra smooth movement Low drive & motor heating Maximum frequency: 200KHz Input voltage: 20 - 50 VDC Output current: 7 selections of 0.50 - 5.60A via DIP switches; or any value of 0.1-5.60A via software configuration Micro steps: 15 selections of half - 128 step via DIP switches; or full - 512 step via software configuration Automatic idle current reduction Electrical Specifications Connector Microstep Resolution Selection And Current Setting Typical Connection Mechanical Specification Companion products 57HS09 (Stepper Motor) 57HS13(Stepper Motor) 57HS22 (Stepper Motor) SPS407 (Power) SPS407-L (Power) RPS2410 (Power) RPS369 (Power) RPS488 (Power) Real Photo:
|
|
|
|
|