aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics - Material:
- Polyolefin
- Country of Manufacture:
- CHINA
- Net Weight:
- 24g
- Brand:
- Unbranded/Generic
- MPN:
- Does not apply
- Manufacturer Part Number:
- Does not apply
- Overall Size:
- 20 x 12mm/0.79 x 0.47"(L*D)
- Main Color:
- Red
- Package Content:
- 30 x Heat Shrink End Caps
Packaging Details - Unit Type:
- piece
- Package Weight:
- 0.260kg (0.57lb.)
- Package Size:
- 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
- Heat shrinkable end caps are typically used to seal cable ends and provide mechanical and environmental protection.Adhesive lined heat shrinkable polyolefin cable caps used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion.
- The material is Polyolefin and Adhesive / Inner Layer.When heated in excess of 121C (250F), Heat Shrink End Caps rapidly shrinks, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. Adhesive reflow will occur at temperatures above 80C (176F).
- The operating temperature range is from -55C (-67F) to 110C (230F), with a shrinking temperature minimum of 121C (250F).
- Shrink Ratio: 2:1
- Package Content: 30 x Heat shrinkable end caps
- Product Sizing:
Size | Before Heat Shrink (As Supplied) | After Heat Shrink(Full Recovered) | Outter Dia | 12mm | 6mm (Approx.) | Inner Dia (D / d) | 10mm | 5mm (Approx.) | Length (L) | 20mm | / | Wall Thickness(W) | 1mm | 1mm (Approx.) |
Main Color | Red | Manufacturer Part Number | Does not apply | | | Brand | Unbranded/Generic | Overall Size | 20 x 12mm/0.79 x 0.47"(L*D) | Shrink Ratio | 2:1 | Country of Manufacture | CHINA | Package Content | 30 x Heat Shrink End Caps | Material | Polyolefin | MPN | Does not apply |
|