Packaging Details
- Unit Type: piece
- Package Weight: 6.000kg (13.23lb.)
- Package Size: 27cm x 19cm x 15cm (10.63in x 7.48in x 5.91in)
Model : M45-CO2 35 Mpa small air driven liquid Co2 pump ,Co2 cylinder filling pump ,
1 Set complete seal kits and related air regulator are included .
General Information for air driven liquid pumps
We offer the complete range of models in the industry measured for:
A. Capability of ultimate pressure, flow or output horsepower.
B. Compatibility with a broad variety of liquids, such as oil, water and chemical applications.
Wellnesspumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi). However, we advise the pressure within 8bar for service life
ofthe pumps.Basically the principle of operation is similato a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated
4/2 way valve.Ourpumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determing maximum
outlet pressure. Higher pressure is obtained by high pressure ratio .
C. Wellness pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid
to be pumped, flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve
is closed.The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure.
liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces
are equal.The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number
of conditions,such as freezing of muffler or pilot valves(which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult
for exact flow conditions not shown in charts.
Typical applications for air liquid pumps
Product charateristics
M45-CO2 model air driven liquid pumps are high pressure reciprocating plunger pumps of single acting, single
air drive head model. Air drive pressure from 1bar(14.5 psi) to 8bar(116 psi) maximum. Operating pressure
up to 1,360 bar (19,720 psi).
Specifications
1 .light weight, easy to carry
2. applicable to most of liquids
3.high rate of flow, wide range of pressure
Connection size of the pump
Key features
- One model available in 8 ratios
- Compatibility with a variety of liquids
- Safe pneumatic operation
- Aluminum bodies and wetted materials of carbon steel or stainless steel
- Rugged,compact,reliable and easy maintenance proven design
- High quality seals, long service life available
- No need for air line lubrication
- Wide application with large range of pressure rati
- Technical data of M pump
- Specification of pumps
Air driven pressure 7 Bar Pump working performance |
Model | Maximum output Pressure (Bar ) | Maximum output liquid pressure 1Mpa=10 Bar=10kg/CM2 |
0 | 25 | 50 | 75 | 100 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 700 |
Liquid flow Maximum L/Min |
M10 | 83 | 15.27 | 8.75 | 5.15 | 0 | | | | | | | | | |
M16 | 132 | 8.6 | 6.5 | 4.3 | 3.1 | 1.2 | | | | | | | | |
M25 | 207.5 | 4.2 | 3.94 | 2.75 | 1.47 | 0.82 | 0.46 | 0 | | | | | | |
M45-CO2 | 373.5 | 2.76 | 1.83 | 1.75 | 0.94 | 0.75 | 0.56 | 0.45 | 0.29 | 0.21 | 0.15 | 0 | | |
M64 | 531.2 | 1.45 | 1.36 | 1.27 | 1.09 | 0.95 | 0.72 | 0.55 | 0.42 | 0.36 | 0.27 | 0.14 | 0.11 | 0 |
M100 | 830 | 0.52 | 0.98 | 0.45 | 0.4 | 0.37 | 0.31 | 0.28 | 0.27 | 0.25 | 0.2 | 0.17 | 0.15 | 0.09 |
Typical diagram for liquid pumps
Real pictures of M45-Co2 pump and 1 set complete seal kits
Our main products including:
Pneumatic Booster Pumps (Air Driven Gas Booster Pump,Air Driven Liquid Pump,Air Amplifiers)
Pneumatic Booster Systems (Air Driven Gas/Liquid Booster Stations, HFC-227ea/FM200 filling
machine,High Pressure Hydraulic/Pneumatic Test Machine,Burst/Hydrostatic pressure testing
machine,Impulse Testing Machine,etc.)